Toyota Corolla - Repair abs pump

The ABS block, what is it?

The stability of the vehicle thanks to the ABS block

Since January 1, 2003, the Highway Code provides that it is mandatory to have an ABS block in working order on every automobile. The principle of the ABS system is rather well understood by the general public because it prevents the wheels from locking up when the driver presses the brake pedal a little too hard.

The ABS system to prevent wheel lockup

The ABS block is part of the general ABS system. We can observe for the Toyota Corolla vehicle ...

• The wheel speed sensors: there are 2 types, the active sensors operating through electronics, which are supplied via a voltage defined by the ABS computer and passive sensors.
• The magnetic targets: they modify the output signal which takes the appearance of a square signal of variable frequency.
• The ABS block: let's take a closer look at its components below...

The ABS block

The ABS block of the Toyota Corolla automobile is made up of the following components, among others...

The motor driving a hydraulic pump

It transfers the hydraulic energy into mechanical energy.

The hydraulic unit

Many components make it up including:

• Solenoid valves with each wheel having an intake and exhaust solenoid valve.
• The electronic brake splitter, which is an additional function managed by the ECU.
• A hydraulic pump that allows the fluid stored in the accumulator to be pumped back to the master cylinder, which prevents the pedal from depressing.

The ECU

Warns the driver of a malfunction via a light on the dashboard.

How to repair Toyota Corolla ABS block

How to tell if an ABS block is out of order

It is quite often one or the other reason... The wheels lock up during hard braking or an ABS sensor is defective.

What does Diag-Engine.fr offer?

Diag-Engine is a company known for its expertise in Toyota Corolla and other ABS blocks. Please note: Diag-Engine does not offer new ABS blocks.

How does it work?

You need to write down the reference of your failed ABS block to request its repair. Then, all you have to do is pay for the part in your shopping cart after choosing the make and model of vehicle you own. Thus, send us your malfunctioning ABS block immediately after.

48 hours are needed for your ABS block to be repaired and sent to your home.

We are at your disposal by tel or email at the slightest question.

The address you can send it to is listed in the footer of the site.

Customer Reviews

• When I received the ABS block for my Toyota Corolla , I mounted the part myself. I was afraid to turn the ignition key, but...hallelujah! No more ringing!"
• The dealer gave me an estimate of 1400 € to replace my ABS block. Going through Diag-Engine, I got it for only 400 €. Super thank you !
• I do not usually leave a comment following a purchase on the internet, but there I do it without hesitation for my ABS block Toyota Corolla: 5 stars thank you !

Pay in installments or later with your credit card with the company Alma.