Toyota Innova - Repair abs pump

The function of the ABS block

What is the purpose of the ABS block?

For the record, the ABS system was first developed for airplanes in the 1920s to prevent skidding on landing. The function of the ABS block in a vehicle is to prevent the wheels from locking up when the motorist brakes hard.

The ABS system to keep control of the car

Before discussing the ABS block, it is important to understand the ABS system in its entirety. We discover for the vehicle manufacturer Toyota Innova ...

• The ABS block: let's see precisely the elements that make it up below...
• The wheel speed sensors: there are 2 types, the inductive sensors composed of a coil among other things and the active sensors.
• The magnetic targets: they vary the output signal that takes the appearance of a square signal of variable frequency.

The ABS block

Let's see the non-exhaustive structure of the ABS block of the vehicle manufacturer Toyota Innova:

The motor driving a hydraulic pump

It is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The motor's rotational speed is proportional to the flow rate that feeds it.

The ECU

As soon as an impeller tends to lock up, it governs the solenoid valves and the hydraulic pump.

The hydraulic power unit

• Pressure accumulators, which are pressurized gas reservoirs that can hold a variable volume of a pressurized liquid.
• Solenoid valves with a presence of ABS regulation on the rear wheels.
• The electronic distributor that modulates the pressure on the rear wheels.

The Toyota Innova ABS block repair

How to recognize a failing ABS block

This manifests itself mostly as a result of : The vehicle lacks stability in wet driving conditions or an ABS sensor is defective.

What are the services of Diag-Engine?

Diag-Engine is a company located in Eure and expert in the repair of the ABS block of the brand Toyota Innova and others. Please note: Diag-Engine does not offer any new ABS blocks.

How it works?

As soon as we receive your part, we take care of its reconditioning and ship it to you 48 hours later.

The operating principle is simple. You select the brand of your car, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. All that's left is for you to proceed to purchase and send us your problematic ABS block.

The address where you can send it to us is listed at the bottom of the page.

By email or tel, you can contact us during business hours.

Some customer reviews

• I don't usually leave a review when I make a purchase, but there I am very eager to do so I am so happy for my Toyota Innova ABS block: 5 stars thank you!"
• The dealer asked me for 1000 € to replace my ABS block. By going through Diag-Engine, it cost me only 400 €. Super thank you!"
• The Abs block is back together and the braking has regained all its power!"

You have the possibility to pay with Paypal.