Toyota Isis - Repair abs pump

What is the ABS block?

Why is the ABS block essential?

Since 2003, the Highway Code requires that an ABS block be installed on every car. In case of emergency braking, the ABS block ensures that the driver keeps control of his car. Indeed, locking the wheels in such circumstances would cause it to slide down the road.

A valuable aid: the ABS system

Before talking about the ABS block, it is necessary to understand the ABS system in its entirety. We can observe for the Toyota Isis car ...

• The ABS block: what are the components that make it up? Let's look at it in more detail below...
• The magnetic targets: they are represented as a sequence of north and south poles. The alternation of the poles varies the output signal.
• The wheel speed sensors: they measure the speed of rotation of the wheels from 0 km/h.

The ABS block

The ABS block of the Toyota Isis car consists of, among other things...

The ECU

It informs the driver of a technical problem with a specific indicator on the dashboard.

The hydraulic unit

Here are some of the components that make it up...

• A hydraulic pump that prevents the pedal from depressing during ABS regulation.
• Solenoid valves with a presence of ABS regulation on the rear wheels.
• The electronic distributor that modulates the pressure on the rear wheels.

The motor driving a hydraulic pump

This is an organ that transforms a flow rate into rotational speed and a pressure into operating torque. The motor's rotational speed is proportional to the flow rate that feeds it.

The Toyota Isis ABS Block Reconditioning

How do you know if an ABS block has failed?

Most of the time, it's for one of two reasons:

Wheels lock up due to hard braking or an ABS sensor has failed.

What are the services of the Diag-Engine company?

Diag-Engine is a French company that has largely proven itself in terms of its automotive expertise. Please note: Diag-Engine does not offer any new ABS blocks.

How does it work?

It takes one week for you to receive your repaired ABS block.

The principle of operation is very quick. You choose the brand corresponding to your car, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. Thus you only have to proceed to the purchase and send us your defective ABS block.

The address to which you must send it to us is indicated at the bottom of the site.

By email or by tel, let us know your questions.

They trusted us

• Thank you for your fast and efficient service. The breakdown has disappeared. The CT validated.
• I am not used to leaving a review following a purchase, but there, I do it without hesitation for my Toyota Isis ABS block: 5 stars thank you!"
• The dealer asked me 1200 € to replace my ABS block. Thanks to Diag-Engine, it cost me 350 €. Super thank you !

Put your order with your CB through our secure module.