Toyota Mark X - Repair abs pump

How does an ABS block work?

Definition of ABS block

For the record, the ABS system was first developed for airplanes in the 1920s to prevent skidding on landing. The ABS block controls the deceleration power of each wheel by adapting the level of pressure applied. Because too much pressure on the brake pedal may cause the wheels to come to a complete stop.

The ABS system to prevent wheel lockup

The ABS block is an accessory to the overall ABS system. It can be noted for the vehicle manufacturer Toyota Mark X ...

• The wheel speed sensors: each sensor is placed in front of a rotating notched wheel, which generates a magnetic field variation and induces a sinusoidal signal.
• The ABS block: the following technical details help to understand the importance of this element.
• The magnetic targets: they are in the form of a succession of north and south poles. The alternation of the poles changes the output signal.

The ABS block

In an ABS block of the Toyota Mark X vehicle , we distinguish in particular:

The hydraulic unit

It is made up of various elements including...

• The electronic distributor that nuances the pressure on the rear wheels.
• Solenoid valves with the presence of ABS regulation on the rear wheels.
• A hydraulic pump whose discharge is the cause of the eddies felt at the pedal.

The computer

It receives information from each of the wheel sensors.

The hydraulic motor

It transfers hydraulic energy into mechanical energy.

How to replace Toyota Mark X ABS block?

How to recognize a faulty ABS block?

There are many reasons and the ones that appear most of the time are... The car lacks stability on icy roads or the brake pressure regulation does not work normally.

What does Diag-Engine.fr offer?

Diag-Engine is a company known for its expertise in Toyota Mark X ABS block and others. It is important to understand that Diag-Engine does not offer any new ABS blocks.

What is the procedure?

As soon as we receive your part, we will take care of its reconditioning and send it back to you 48 hours later.

The method of operation is extremely simple. You select the make of your vehicle, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. So all you have to do is order and send us your broken ABS block.

Don't worry, if you are not sure about the ABS block model, just ask us so that we can tell you.

You will find our contact information at the bottom of the page.

They are happy with Diag-Engine

• When I received the ABS block for my Toyota Mark X , I mounted the part myself. I was afraid to start, but ... oh joy! no more warning triangle!
• The Abs block is now reassembled and the braking has regained all its power!
• I do not usually leave a comment when buying on the internet, but there, I do it without hesitation for my ABS block Toyota Mark X: 5 stars thank you!

You have the option to pay with Paypal.