Toyota Door - Repair of abs block
  • Toyota Door - Repair of abs block

Toyota Porte - Repair abs pump

Toyota Porte ABS pump repair within 24–48 hours at a fixed price of €396 Money-back guarantee and lifetime warranty included. Over 99.9% success rate on ABS pump repairs. Contact us via WhatsApp +33626664155 or email for more information.
396,00 € Com IVA
Il n'y a pas encore d'avis.
Quantidade

Réparation ABS Diag-engine

Car ABS pump repair procedure

ABS Repair Process for Toyota Porte - €396 with Lifetime Warranty - Repair completed within 24–48 hours

Car ABS Repair Procedure

  • ✅ Add your car model to your cart and place your order on our secure website.
  • ✅ Print your invoice and carefully package your original ABS unit.
  • ✅ Send your ABS unit to us along with your invoice (shipping at your expense).
  • ✅ Once received, our technicians will repair your ABS unit within 24 to 48 hours.
  • ✅ We ship your repaired ABS unit back to you free of charge, ready for reinstallation.
  • ✅ All our repairs are covered by a lifetime warranty for your peace of mind.
  • ℹ️ Repairing your ABS unit allows you to keep your original factory-installed part. No coding, programming or vehicle adaptation is required for the reinstallation.
Repaired ABS pump, lifetime warranty included

Repairable ABS Pump Faults – Toyota

  • Brake fluid remaining under pressure in one or more brake calipers
  • Brakes remaining under pressure after releasing the brake pedal
  • Braking issues without the ABS dashboard light turned on
  • Soft brake pedal that sinks or feels hard when pressed
  • Braking issues with the ABS dashboard light turned on
  • Bleeding impossible on one or more brake calipers
  • One or more wheels locking during braking
  • One or more wheels braking incorrectly
  • No braking pressure on one wheel
  • Vibrations felt during braking
  • Brake fluid leak
  • C146C C146D – Pump motor fault
  • C1246 – Brake pressure sensor fault
  • C0279 C1361 C0279 – Internal solenoid valve relay fault
  • C1073 C2116 – Pump motor circuit fault
  • C121D C121E – Brake pressure sensor fault
  • C1251 – Pump motor relay fault
  • C1223 – Pump motor relay fault
  • 55 – Pump motor relay fault
  • 56 – Pump motor relay fault
  • C0273 – Open circuit in ABS pump motor relay circuit
  • C0274 – Open circuit in ABS pump motor relay circuit
Repair your ABS unit ABS repair you can trust
Diag-Engine
330 Itens

Ficha informativa

Brand
Toyota
Model
Porte

Referências específicas

The operation of the ABS block


Definition of the ABS block


Since January 1, 2003, it is mandatory to have an ABS block installed on every car. The function of the ABS block of a car is to prevent, when the motorist brakes suddenly, the wheels from locking.


The ABS system to prevent wheel lockup


Before explaining the ABS block in detail, it is necessary to identify the ABS system entirely. We distinguish for the Toyota Porte model ...


  • Magnetic targets: they generate signals read by the sensors, which transmit these signals to the ABS computer.
  • Wheel speed sensors: there are 2 types, active sensors operating through electronics, which are powered by a voltage determined by the ABS computer and inductive sensors.
  • The ABS block: let's see in more detail the elements that make it up below...

The ABS block


Several elements of the ABS block of the Toyota Door car to discover including...


The ECU

It receives information that emanate from each of the wheel sensors.


The hydraulic unit

Here are some of the components that make it up...


  • Solenoid valves that limit the brake pressure of each wheel.
  • The electronic splitter that modulates the pressure on the rear wheels.
  • A hydraulic pump that delivers the fluid stored in the accumulator to the master cylinder.

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.


The Toyota Porte ABS block replacement


What are the symptoms of a defective ABS block?


The origins are varied and those that show up most of the time are... The car is unstable on icy roads or an electrical problem.


What are the services of Diag-Engine?


Diag-Engine is a company located in the department of Eure for many years and specializes in the replacement of the ABS block of the brand Toyota Porte and others. Please note: Diag-Engine does not sell any new ABS blocks.


How it works?


Go to the Diag-Engine.fr store to define the make and model of your vehicle. Check that the reference corresponds to that of your ABS block. Then place your order and make your purchase. As soon as possible, send to the address that appears on the order form your broken part.


As soon as we are in possession of your ABS block, wait only a few days to receive it functional again.


The address to which you should send it is listed at the bottom of the site.


Can't find the reference? Contact us and we will assist you.


They trusted us


The Diag-Engine company is pleased to count several thousand reviews from individuals and professionals delighted with their ABS block.
  • The installation of my ABS block was done by my garage owner! I hope the repair will be durable even though it is guaranteed for life!"
  • The Abs block is now reassembled and the brakes work as before!"
  • The dealer gave me a quote of €1000 to replace my ABS block. Thanks to Diag-Engine, it cost me 350 €. Great thanks!"

Ask a French company known for its expertise.


We repair the whole car or motorcycle abs block that our customers often call by the following terms: pressure sensor - abs pump - abs hydraulic block - abs ECU - abs box - abs kit - hydraulic group - abs esp block. Please note that we do not sell new or second hand products!