Toyota Rush - Repair abs pump

How does an ABS block work?

The car's stability thanks to the ABS block

For the record, the ABS system has been around since 1920 in the aviation industry: it was necessary to prevent airplanes from skidding on landing. The acronym ABS comes from the German "Antiblockiersystem". It is an anti-lock wheel system that ensures control of the vehicle when sudden braking occurs.

The ABS system to prevent wheel lockup

Before explaining the ABS block in detail, it is important to understand the ABS system entirely. There are for the Toyota Rush automobile ...

• Magnetic targets: they are, depending on the car models, integrated into the wheel bearings.
• Wheel speed sensors: there are 2 types, passive sensors composed in particular of a coil and active sensors.
• The ABS block: more details below.

The ABS block

The ABS block of the vehicle manufacturer Toyota Rush consists of the following elements in particular:

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

The hydraulic power unit

• Pressure accumulators, which are nothing more than pressurized gas tanks used to provide a large flow rate for a short period of time.
• Solenoid valves, of which each wheel has an inlet and an exhaust solenoid valve.
• The electronic splitter that shades the pressure on the rear wheels.

The ECU

It receives an indication from the brake pedal.

How to repair Toyota Rush ABS block

How to tell if an ABS block is failing

This is mostly manifested following : The car is unstable in wet driving conditions, an ABS sensor is out of order.

What does Diag-Engine offer?

Diag-Engine is a company located in the Eure region and specializes in the replacement of the ABS block of the Toyota Rush brand and others. Please note: Diag-Engine does not offer new ABS blocks.

What is the procedure?

The repair of your ABS block and shipping takes only a few days.

The method of operation is very simple. You choose the make of your automobile, then the model and then the name of the ABS block manufacturer that corresponds to it. All you have to do is order and send us your malfunctioning ABS block.

Do not hesitate to contact us, a technician will assist you.

You will find the contact information of the Diag-Engine workshop at the bottom of the site.

Some customer feedback

• The Abs block is back together and the brakes are working like before!"
• Thank you for your fast and efficient service. The fault is gone. The CT validated.
• The dealer asked me 1200 € to replace my ABS block. With Diag-Engine, it cost me 350 €. Phew thank you!"

Pay in installments or later with your credit card with Alma.