Volkswagen Passat CC - Repair abs pump

The operation of the ABS block

The ABS block, what is it?

It was the German company Bosch that designed a first electronic ABS system in the late 1970s. The principle of the ABS system is recognized as essential for road safety since it prevents the wheels from locking up when the driver presses the brake pedal a little too hard.

The ABS system to keep control of the vehicle

Before explaining the ABS block, it is necessary to understand the ABS system entirely. We distinguish for the car manufacturer Volkswagen Passat CC ...

• The ABS block: the technical details below allow us to understand the importance of this accessory.
• The wheel speed sensors: we note 2 types, the inductive sensors composed in particular of a permanent magnet and the active sensors.
• The magnetic targets: they produce signals read by the sensors, which send these signals to the ABS computer.

The ABS block

The ABS block of the Volkswagen Passat CC car is made up of the following elements in particular...

The hydraulic unit

Many elements make it up including...

• Pressure accumulators, which are none other than pressurized gas tanks that can hold a variable volume of a pressurized liquid.
• A hydraulic pump, the action of which moves the liquid stored in the accumulator to the master cylinder, preventing the pedal from depressing.
• Solenoid valves, which regulate the brake pressure for each wheel.

The ECU

It receives the signal emanating directly from the brake pedal.

The hydraulic motor

Transfers the hydraulic energy into mechanical energy.

The Volkswagen Passat CC ABS Block Reconditioning

Main manifestations of the faulty ABS block

The causes are numerous and those that often manifest themselves are... The automobile is unstable in wet driving conditions, a concern of electrical nature.

What does Diag-Engine.co.uk offer?

Diag-Engine is a competent company in repairing the ABS block of all brands. It is important to understand that Diag-Engine does not sell any new ABS block.

What is the operating mode?

48 hours is enough for your ABS block to be functional again and then sent to the location of your choice.

The operating principle is simple. You choose the brand corresponding to your car, then the model and then the name of the manufacturer of the ABS block that corresponds to it. So all you have to do is order and send us your problematic ABS block.

Can't find the reference? Write to us and we will assist you.

The address to which you can send it is visible in the footer.

They are happy with Diag-Engine

• Thank you for your fast and efficient service. The breakdown has disappeared. The technical control could be favorable.
• I do not usually leave a review following a purchase, but there I do it without hesitation for my ABS block Volkswagen Passat CC: 5 stars thank you!"
• The Abs block is reassembled and the brakes work as before!

Use the chat window to submit your question to us during store hours.