Audi A4 B7 - Repair of abs block
  • Audi A4 B7 - Repair of abs block

Audi A4 B7 - Repair abs pump

Repair your ABS Pump Audi A4 B7 within 24/48 hours at a cost of 396 Euros. Our service is Money Back Guaranteed with a lifetime warranty. We repair the 99.9% of ABS Blocks. Contact us for more information!
€396.00 Tax included
Il n'y a pas encore d'avis.
Quantity

AUDI A4 B7 ABS pump repair service

Procedure:

red-cross-1-en.jpg We offer a repair service for your ESP ABS pump

red-cross-1-en.jpg Place an order on the site by selecting your model, print your invoice and then send us your original ABS pump well protected by enclosing the invoice in the parcel, shipping is at your expense, the return is free.

red-cross-1-en.jpg We process ABS pump repairs in 48 hours upon receipt.

red-cross-1-en.jpg All repairs come with a lifetime warranty.

red-cross-1-en.jpg Repairable defects in the list below

Fondw2-en.jpg

Defects:

red-cross-1-en.jpg - No brake pressure on one wheel

red-cross-1-en.jpg - Brakes remain pressurized

red-cross-1-en.jpg - Brake fluid leak

red-cross-1-en.jpg - Soft brake pedal

red-cross-1-en.jpg - 01276 04FC ABS hydraulic pump (V64)

red-cross-1-en.jpg - 16352 3FE0 Internal electronic fault

red-cross-1-en.jpg - 16349 3FDD Internal electronic defect

red-cross-1-en.jpg - 16355 3FE3 Internal electronic defect

red-cross-1-en.jpg - 01435 059B G201 Brake pressure transmitter

red-cross-1-en.jpg - 01130 1130 046A Signal implausible

contactbas-en.jpg

Diag-Engine
330 Items

Data sheet

Brand
Audi
Model
A4 B7

Specific References

0 265 225 0480 265 950 4298E0 614 5178E0 910 5170 265 950 0110 265 950 4678E0 614 517 A8E0 910 517 AK0 265 950 0120 265 950 4688E0 614 517 AQ8E0 910 517 B0 265 950 1060 265 950 4738E0 614 517 AT8E0 910 517 J0 265 950 3570 265 950 4748E0 614 517 BH8E0 910 517 K0 265 950 4140 265 950 6058E0 614 517 Q8E0 914 517 D2652250482659504298E06145178E09105172659500112659504678E0614517A8E0910517AK2659500122659504688E0614517AQ8E0910517B2659501062659504738E0614517AT8E0910517J2659503572659504748E0614517BH8E0910517K2659504142659506058E0614517Q8E0914517D

Principle of the ABS block


What is the purpose of the ABS block?


The ABS is mandatory in Europe since 2003. It works through sensors, an ECU and a hydraulic control system. The ABS block limits the deceleration force of each wheel by adapting the level of pressure exerted. Because too much pressure on the brake pedal may cause the wheel to lock.


The ABS system to keep control of the car


The ABS block is a part of the general ABS system. There are for the Audi A4 B7 car ...


  • The wheel speed sensors: there are 2 types, the active sensors that are powered by the ABS ECU via a cable and the passive sensors.
  • The ABS block: the following information helps to understand the importance of this element.
  • The magnetic targets: they vary the output signal that takes the appearance of a square signal of variable frequency.

The ABS block


Many elements of the ABS block of the Audi A4 B7 vehicle manufacturer to know including...


The ECU

It receives information from each wheel sensor.


The hydraulic unit

It consists of various components including:


  • A hydraulic pump that locks the brake pedal so that it does not sink.
  • Solenoid valves with the presence of ABS control on the rear wheels.
  • Pressure accumulators that are none other than tanks of pressurized gas used to provide a large flow for a fairly short time.

The hydraulic motor

It is a body that transforms a flow into rotational speed and a pressure into operating torque. The rotational speed of the motor is proportional to the flow rate that feeds it.


How to repair Audi A4 B7 ABS block


Main manifestations of ABS block out of order


This is quite often one reason or another... The car lacks stability on wet roads or an ABS sensor is defective.


What are the services of the company Diag-Engine?


Diag-Engine is a company located in the department of Eure and specializes in the reconditioning of the ABS block of the brand Audi A4 B7 and others. Please note: Diag-Engine does not sell new ABS blocks.


What is the operating mode?


One week is necessary for you to get back your repaired ABS block.


The operating principle is very fast: you choose the brand corresponding to your vehicle, then the model and finally the brand of ABS block that corresponds to it. Then you just have to order and send to Diag-Engine your failed ABS block.


Do not hesitate to contact us, a specialist will help you.


You will find the address of Diag-Engine.fr in the footer of the site.


Some customer reviews


Diag-Engine to the pleasure of receiving many reviews from individuals and garage owners delighted with their ABS block.
  • Very responsive and fast service. Just 8 days between the sending and the return in colissimo after repair.
  • The Abs block is now reassembled and the braking has regained all its power!"
  • The installation of my ABS block was done by my garage! I hope the repair will be durable even if it is guaranteed for life!

Go to a French company known for its know-how.


We repair the whole abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!