Audi S8 D5 - Repair abs pump

Principle of ABS block

ABS block and car control

The ABS block is an indispensable part of the safety of a vehicle. The principle of the ABS system is now known to all: it simply prevents the wheels from locking when the driver presses the brake pedal too hard.

Focus on the ABS system

The ABS block is a part of the general ABS system. We distinguish for the car manufacturer Audi S8 D5 ...

• The wheel speed sensors: each of the sensors is placed in front of a rotating notched wheel that generates a magnetic field variation and induces a sinusoidal signal.
• The ABS block: the following information helps to understand the importance of this accessory.
• The magnetic targets: they produce signals read by the sensors, which transmit these signals to the ABS ECU.

The ABS block

The ABS block of the Audi S8 D5 model is made up of the following elements, among others...

The ECU

Each time a wheel locks, it regulates the solenoid valves and the hydraulic pump.

The motor driving a hydraulic pump

It uses the flow of oil that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as the differential or the wheel, etc.

The hydraulic unit

It is composed of various elements including...

• A hydraulic pump whose discharge causes the swirls felt at the pedal.
• Pressure accumulators which are none other than pressurized gas tanks that can hold a variable volume of a pressurized liquid.
• The electronic distributor that nuances the pressure on the rear wheels.

How to change the Audi S8 D5 ABS block.

How to recognize an ABS block HS.

This often manifests itself following... The car lacks stability in wet driving conditions, an electrical problem.

What does Diag-Engine.co.uk offer?

Diag-Engine is a company known for its expertise in Audi S8 D5 and other car parts. Therefore, you will not be able to buy new ABS blocks from Diag-Engine.

How does it work?

From the moment we receive your ABS block, it only takes a few days for you to receive it back in working order.

Go to the Diag-Engine.co.uk store to choose the make and model of your vehicle. Compare the reference with the one of your ABS block. Then place your order to make your payment. As soon as possible, send to the address indicated on the order form your failed part.

Can't find the reference? Write to us and we will assist you.

The address to which you should send it is listed at the bottom of the site.

They trusted us

Many individuals and professionals were keen to testify regarding their ABS block repair.

• I sent my ABS block to Diag-Engine and all the follow-up and service were top notch, from the verbal exchange to the repair and from the delay to the delivery.
• I was asked 1200 € to replace my ABS block. By going through Diag-Engine, it cost me only 350 €. Super thank you !
• The Abs block is now reassembled and the brakes work as before !

Important ! Payment in installments and free of charge is possible.

We repair the entire abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs ECU - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!