Fiat Barchetta - Repair abs pump

How the ABS block works

Automotive stability with the ABS block

It was Bosch that designed an early electronic ABS system in the late 1970s. The ABS block regulates the pressure of the hydraulic fluid that travels from the pedal to the brake calipers. Thanks to a sensor, installed on the wheels, the ABS block can thus release the pressure on the locked wheels, to restore control of the vehicle's trajectory to the motorist.

The ABS system quickly

The ABS block is an accessory of the general ABS system. We distinguish for the car manufacturer Fiat Barchetta ...

• The wheel speed sensors: each of the sensors is placed in front of a notched wheel that induces a sinusoidal signal whose quality depends on the speed of rotation of the wheels.
• The ABS block: let's see in more detail the elements that make it up below ...
• The magnetic targets: they are represented as a series of north and south poles. The alternation of the poles changes the output signal.

The ABS block

In an ABS block due to car manufacturer Fiat Barchetta , we observe among other things...

The hydraulic unit

It is composed of several elements including:

• Pressure accumulators which are pressurized gas reservoirs that are used to provide a large flow rate for a fairly short time.
• A hydraulic pump whose discharge causes the vibrationns felt under the foot.
• Solenoid valves with a presence of ABS regulation on the rear wheels.

The hydraulic motor

It transfers hydraulic energy into mechanical energy.

The ECU

Each time a wheel locks, it guides the solenoid valves and the hydraulic pump.

The Fiat Barchetta ABS block reconditioning

How to tell if an ABS block is broken down.

Most of the time, it's for one reason or another: The car lacks stability on icy roads or an electrical concern.

What are the services of the company Diag-Engine?

Diag-Engine is a company located in the department of Eure for many years and expert in the reconditioning of ABS block of the brand Fiat Barchetta and others. Let us emphasize that Diag-Engine does not offer new ABS blocks.

What is the mode of operation?

The reconditioning of your ABS block and the shipment are fast.

You have to locate the reference of your malfunctioning ABS block to request its repair. Then, you just have to make your payment the part in your cart after selecting the make and model of automobile you own. Thus, send us your defective ABS block as soon as possible.

By mail or by tel, let us know your questions.

You will find the address of the Diag-Engine workshop at the bottom of the page.

They are satisfied with the company Diag-Engine.fr

• The garage owner asked me 1300 € to replace my ABS block. By going through Diag-Engine, I got it for 380 €. Super thank you !
• Thank you for your fast and efficient service.The ABS light on disappeared. The CT could be favorable.
• The Abs block is now back together and the braking has regained all its power!

Use the chat window to tell us about your problem during store hours.