Fiat Grande Punto - Repair abs pump

Understanding the principle of the ABS block

Why is the ABS block essential?

The ABS has been mandatory in Europe since 2003. It works through sensors, an ECU and a hydraulic control system. The anti-lock braking system is an emergency braking assistance.It helps to maintain control of the vehicle by preventing the wheels from locking.

The ABS system to keep control of the car

The ABS block is part of the general ABS system. We can notice for the brand Fiat Grande Punto ...

• Magnetic targets: they produce signals read by the sensors, which send these signals to the ABS computer.
• Wheel speed sensors: there are 2 types, inductive sensors composed of, among other things, a coil and active sensors.
• The ABS block: let's see precisely the elements that make it up below...

The ABS block

Various elements of the ABS block of the Fiat Grande Punto model to be apprehended including...

The motor driving a hydraulic pump

This is an organ that transforms a flow rate into rotational speed and a pressure into operating torque. The motor's rotational speed is proportional to the flow rate that feeds it.

The ECU

As soon as a wheel tends to lock, it governs the solenoid valves and the hydraulic pump.

The hydraulic unit

Here are some of the components that make it up:

• Electronic brake distribution, which has a complementary role managed by the ECU.
• A hydraulic pump whose discharge causes the swirls felt at the pedal.
• Solenoid valves, of which each wheel is equipped with a solenoid intake valve and a solenoid exhaust valve.

How to replace Fiat Grande Punto ABS block

Main manifestations of ABS block failure

There are many reasons and the ones that occur most of the time are: The car is unstable on icy road, a problem of electrical nature.

What are the services of the company Diag-Engine.co.uk?

Diag-Engine is a company that specializes in repairing the ABS block of all brands. It is important to understand that Diag-Engine does not offer new ABS blocks.

What is the procedure?

48 hours is enough for your ABS block to be functional again and sent to the place of your choice.

You need to know the reference of your defective ABS block in order to order its repair. Then you just have to pay for the part in your cart after choosing the make and model of the car you own. Finally, send us your malfunctioning ABS block immediately afterwards.

Don't worry, if you have any doubts about the model of the ABS block, just contact us and we will let you know.

The address where you need to send it to us is visible in the footer.

They are happy with Diag-Engine.co.uk

• When I received the ABS block for my Fiat Grande Punto , I mounted the part myself. I was afraid to turn the ignition key, but... hallelujah! no more warning triangle!"
• The mechanic gave me an estimate of 1100 € to replace my ABS block. With Diag-Engine, I got it for only 380 €. Phew thank you!"
• I sent my ABS block to Diag-Engine and all the follow-up and service were on point, from the contact to the repair and from the delay until the delivery.

Pay in 3 times without fees and receive an immediate answer.