Ford Bronco - Repair abs pump

Principle of the ABS block

The ABS block and road safety

The ABS is mandatory in Europe since 2003. It works through sensors, a computer and a hydraulic control system. The principle of the ABS system is recognized as essential for road safety since it prevents the wheels from locking when the driver presses the brake pedal a little too hard.

The ABS system quickly

The ABS block is a part of the general ABS system. There are for the car manufacturer Ford Bronco ...

• The wheel speed sensors: there are 2 types, namely inductive sensors consisting of a coil among other things and active sensors.
• The ABS block: let's see in more detail the elements that make it up below...
• The magnetic targets: they vary the output signal, which is in the form of a square signal of variable frequency.

The ABS block

Various elements of the ABS block due to car manufacturer Ford Bronco to know including...

The ECU

This is the part that receives the indication that emanates directly from the brake pedal.

The hydraulic unit

It is composed of several elements including:

• Solenoid valves that eliminate the need for a brake compensator.
• A hydraulic pump that moves the fluid stored in the accumulator to the master cylinder thus preventing the pedal from depressing.
• Pressure accumulators which are pressurized gas tanks used to provide a large flow rate for a short period of time.

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

Ford Bronco ABS block repair

Main manifestations of the failed ABS block

The causes are various and the ones that often appear are : Wheels lock up following heavy braking, an electrical concern.

What does Diag-Engine offer?

Diag-Engine is a company that is an expert in the replacement of the ABS block all types of models. It is important to understand that Diag-Engine does not offer new ABS blocks.

Concretely...

From the moment we receive your ABS block, a few days are enough for you to receive it functional again.

You need to know the reference of your malfunctioning ABS block to request its repair. Then, all you have to do is pay for the part present in your cart after selecting the make and model of the vehicle you own. So, send us your malfunctioning ABS block immediately after.

You can find our address in the footer.

Don't worry, if you are not sure about the choice of ABS block, just ask us and we will communicate it to you.

Some customer comments

• The Abs block is back up and the braking has regained all its power!"
• The installation of my ABS block was done by my garage owner! I hope that the repair will be durable even if it is guaranteed for life!"
• I sent my ABS block to Diag-Engine and all the follow-up and service were at the rendezvous, from the verbal exchange to the repair and from the delay until the delivery.

Make your purchase in installments or later by credit card with the company Alma.