Honda City - Repair abs pump

How does an ABS block work?

The ABS block: a Bosch invention

The ABS has been mandatory in Europe since 2003. It works through sensors, an ECU and a hydraulic control system. The ABS block controls the intensity of slowing down of each wheel by adapting the level of pressure exerted. Because too much pressure on the brake pedal may cause the wheels to come to a complete stop.

Focus on the ABS system

The ABS block is part of the general ABS system. We can notice for the Honda City car ...

• The wheel speed sensors: there are 2 types, namely the active sensors operating through electronics, which are supplied via a voltage defined by the ABS ECU and passive sensors.
• The ABS block: let's see in more detail the elements that compose it below...
• The magnetic targets: they modify the output signal, which is in the form of a square wave signal of variable frequency.

The ABS block

Let's take a look at some of the elements of the Honda City brand ABS block...

The hydraulic unit

It is made up of several elements including:

• A hydraulic pump that locks the brake pedal so that it does not sink.
• The electronic splitter that modulates the pressure on the rear wheels.
• Solenoid valves that eliminate the need for a brake compensator.

The motor driving a hydraulic pump

It uses the flow of oil that is pushed into the hydraulic circuit by a hydraulic pump and transforms it through a rotary motion to drive another device such as the differential or wheel, etc.

The ECU

It receives information that emanates from each wheel sensor.

Honda City ABS block replacement

How to recognize an ABS block that is out of order

It often manifests itself as a result of... The car is unstable in wet driving conditions or an electrical problem.

What are the services of the company Diag-Engine.fr?

Diag-Engine is a company specializing in the replacement of the ABS block all brands. Please note: Diag-Engine does not sell new ABS blocks.

How to do it?

The operating principle is very simple. You choose the make of your vehicle, then the model and then the brand of ABS block that corresponds to it. All that remains is for you to proceed with the purchase and send us your failed ABS block.

48 hours are required for your ABS block to be functional again and then sent to the address you indicated.

You will find our address at the bottom of the site.

Don't worry, if you are not sure about your choice of ABS block, just ask us so that we can communicate it to you.

Customer reviews

• The Abs block is now reassembled and the brakes work as before!"
• When I received the ABS block for my Honda City , I mounted the part myself. I was afraid to turn the ignition key, but...hallelujah! No more ringing!"
• The mechanic gave me an estimate of 1100 € to replace my ABS block. Going through Diag-Engine, it cost me 400 €. Super thank you !

Pay in installments or later with your credit card with Alma.