- There are no more items in your cart
- Shipping
- Total €0.00
Honda CR-V - Repair abs pump
Honda CR-V ABS pump Repair Service
Procedure:
We offer a repair service for your ESP ABS pump
Place your order on the site by selecting your model, print your invoice and then send us your original ABS pump well protected by attaching the invoice in the package, shipping is at your expense, return is free.
We process ABS pump repairs within 48 hours of receipt.
All repairs are guaranteed for life.
Repairable defects in the list below
Defects:
- No brake pressure on one wheel
- Brakes remain pressurized
- Brake fluid leakage
- Soft brake pedal
- 52-1 Pump motor circuit
- 66-01 Brake pressure sensor fault
Principle of the ABS block
What is the purpose of the ABS block?
The ABS is mandatory in Europe since 2003. It works through sensors, an ECU and a hydraulic regulation system. The ABS block regulates the pressure of the hydraulic fluid that transits from the pedal to the brake calipers. Thanks to a sensor, installed on the wheels, the ABS block can thus release the pressure on the locked wheels, to give back the control of the vehicle to the driver.
The ABS system to prevent wheel lockup
The ABS block is part of the general ABS system. There are for the Honda CR-V brand ...
- Magnetic targets: they are, depending on the vehicle models, integrated into the wheel bearings.
- Wheel speed sensors: they measure the speed of rotation of the wheels from 0 km/h.
- The ABS block: more details below.
The ABS block
Different elements of the Honda CR-V car manufacturer's ABS block to discover including:
The hydraulic motor
Transfers hydraulic energy into mechanical energy.
The ECU
Receives information from each wheel sensor.
The hydraulic unit
Here are some of its components...
- Pressure accumulators, which are tanks of pressurized gas used to provide a large flow rate for a fairly short time.
- A hydraulic pump that moves the fluid stored in the accumulator to the master cylinder preventing the pedal from depressing.
- The electronic splitter that shades the pressure on the rear wheels.
How to repair Honda CR-V ABS block
How to tell if an ABS block is out of order.
This often manifests itself as a result of... The car lacks stability on wet roads or the regulation of the brake pressure does not work normally.
What are the services of the company Diag-Engine?
Diag-Engine is a company established in the department of Eure for many years and specializes in the replacement of the ABS block of the brand Honda CR-V and others. Let us specify that Diag-Engine does not sell new ABS blocks.
What is the working mode?
Go to Diag-Engine.fr store to select the make and model of your car. Make sure the part number matches that of your ABS block. Then place your order to make the payment. At the same time, send to the address that appears on the order form your failed part.
7 days is enough for you to have your ABS block back in perfect condition.
You will find the address of Diag-Engine.fr in the footer.
We are here to help you by tel or mail at the slightest doubt.
Some customer comments
Many customers wished to testify regarding the replacement of their ABS block.
- The garage owner gave me an estimate of 1400 € to replace my ABS block. With Diag-Engine, I got it for 380 €. Phew thank you!"
- I sent my ABS block to Diag-Engine and all the follow-up and service were on target, from the contact to the repair and the delay until delivery.
- Thank you for your fast and efficient service. The failure has disappeared. The technical control has validated.
Important! Payment in installments and free of charge is possible.
We repair the whole abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!