Honda Element - Repair abs pump

What is the purpose of the ABS block?

Why is the ABS block essential?

It was the German company Bosch that developed the first electronic ABS system in the late 1970s. The ABS block controls the deceleration force of each wheel by adapting the level of pressure applied. Because too much pressure on the brake pedal can cause the wheel to come to a complete stop.

The ABS system to keep the car under control

The ABS block is a part of the overall ABS system. There are for the car manufacturer Honda Element ...

• Wheel speed sensors: there are 2 types, namely active sensors that are connected to the ABS computer by a cable and passive sensors.
• Magnetic targets: they generate signals read by the sensors, which transmit these signals to the ABS computer.
• The ABS block: the following technical details help to understand the importance of this accessory.

The ABS block

Let's look at the non-exhaustive structure of the Honda Element car ABS block:

The hydraulic motor

It uses the flow of oil that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as the differential or wheel, etc.

The ECU

Each time a wheel locks, it controls the solenoid valves and the hydraulic pump.

The hydraulic unit

• A hydraulic pump that ejects the fluid stored in the accumulator to the master cylinder preventing the pedal from depressing.
• Pressure accumulators which are pressurized gas reservoirs used to provide a large flow rate for a fairly short period of time.
• Solenoid valves that limit the braking pressure of each wheel.

How to change the Honda Element ABS block.

How to recognize an ABS block that is out of order.

This is quite often for one of two reasons:

The wheels lock up during heavy braking or an electrical problem.

What are the services of the company Diag-Engine.fr?

Diag-Engine is a company located in the Eure and specialized in the replacement of the ABS block of the brand Honda Element and others. It is important to understand that Diag-Engine does not offer new ABS blocks.

What is the procedure?

You need to know the reference of your malfunctioning ABS block to order its repair. Then you just have to make your payment the part present in your cart after selecting the make and model of vehicle you own. Finally, send us your defective ABS block as soon as possible.

The repair of your ABS block and shipping is extremely fast.

By email or by tel, let us know your questions.

The address to which you can send it is visible in the footer of the site.

Customer reviews

• I'm not used to leaving a review when I make a purchase, but here, I do it without hesitation for my Honda Element ABS block: 5 stars thank you!!
• The Abs block is now reassembled and the brakes work as before!
• The garage asked me for €1300 to replace my ABS block. By going through Diag-Engine, it cost me only 400 €. Great thank you !

Go to a French company known for its know-how.