Hyundai Genesis - Repair abs pump

Understanding the Purpose of the ABS Block

Defining the ABS Block

It was the German company Bosch that marketed an early electronic ABS system in the late 1970s. The ABS block regulates the pressure of the hydraulic fluid that travels from the pedal to the brake calipers. Thanks to a sensor, installed on the wheels, the ABS block can thus release the pressure on the locked wheels, in order to give back the control of the vehicle's trajectory to the driver.

A valuable assistant: the ABS system

Before talking about the ABS block, it is necessary to properly identify the entire ABS system. We can notice in Hyundai Genesis ...

• The magnetic targets: they come in the form of a succession of north and south poles. The alternation of the poles varies the output signal.
• The wheel speed sensors: there are 2 types, namely the active sensors operating through electronics, which are powered by a voltage defined by the ABS computer and passive sensors.
• The ABS block: more details below.

The ABS block

Various elements of the Hyundai Genesis carmaker's ABS block to discover including...

The ECU

It warns the driver of a malfunction by illuminating a light on the dashboard.

The hydraulic motor

It transfers hydraulic energy into mechanical energy.

The hydraulic unit

Here are some of the components that make it up:

• Pressure accumulators which are nothing more than pressurized gas tanks that can hold a variable volume of a pressurized liquid.
• A hydraulic pump whose action allows the liquid accumulated in the accumulator to be ejected towards the master cylinder thus preventing the pedal from depressing.
• The electronic distributor that modulates the pressure on the rear wheels.

The Hyundai Genesis ABS block replacement

How to recognize a defective ABS block?

The origins are numerous and those that often manifest themselves are: The car lacks stability on icy roads or the regulation of the brake pressure does not work normally.

What does Diag-Engine offer?

Diag-Engine is a company established in the Eure for many years and specialized in the replacement of the ABS block of the Hyundai Genesis brand and others. It is important to understand that Diag-Engine does not offer new ABS blocks.

What is the procedure?

48 hours are needed for your ABS block to be functional again and shipped to your home.

The principle of operation is simple: you choose the brand of your car, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. All you have to do is pay for this order and ship us your problematic ABS block.

We are here to help you by tel or email at the slightest hesitation.

The address to which you should send it to us is listed in the footer of the site.

Customer Reviews

• The Abs block is now reassembled and the brakes are working as before!"
• Thank you for your fast and efficient service. The breakdown has disappeared. The technical control could be favorable.
• Very responsive and fast service. Just 8 days between sending and return colissimo after repair.

Call a French company known for its expertise.