Hyundai Terracan - Repair abs pump

What is an ABS block

The stability of the car thanks to the ABS block

Since 2003, the Highway Code requires to have a functioning ABS block on every automobile. The principle of the ABS system is rather well understood by the general public because it simply prevents the wheels from locking up when the driver abruptly presses the brake.

The ABS system to prevent wheel lockup

Before discussing the ABS block, it is important to understand the ABS system entirely. We distinguish in Hyundai Terracan ...

• The ABS block: how is it composed? This is what we will find out...
• The wheel speed sensors: there are 2 types, active sensors operating through electronics, which are supplied via a voltage determined by the ABS computer and inductive sensors.
• The magnetic targets: they are represented as a succession of north and south poles. The alternation of the poles changes the output signal.

The ABS block

Let's look at the partial composition of the Hyundai Terracan ABS block:

The ECU

Each time a wheel locks, it controls the solenoid valves and the hydraulic pump.

The hydraulic motor

It uses the oil flow that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as the gearbox or another pump, etc.

The hydraulic unit

• Electronic brakeforce distribution, which is an additional function managed by the ECU.
• Solenoid valves with the presence of ABS control on the rear wheels.
• A hydraulic pump that prevents the pedal from depressing during ABS regulation.

How to repair the Hyundai Terracan ABS block?

Main manifestations of the failed ABS block

The causes are varied, and those that often appear are: The car lacks stability on icy road or the brake pressure regulation does not work normally.

What are the services of Diag-Engine.co.uk?

Diag-Engine is a company known for its expertise in Hyundai Terracan car parts and others. Let us specify that Diag-Engine does not sell any new ABS block.

What is the working mode?

One week is enough for you to own your repaired ABS block again.

The working principle is simple: you choose the brand corresponding to your vehicle, then the model and then the brand of the ABS block which corresponds to it. All you have to do is order and ship us your failed ABS block.

The address to which you must send it to us is visible in the footer of the site.

By email or by tel, you can contact us during business hours.

They are satisfied with Diag-Engine company

• I sent my ABS block to Diag-Engine and all the follow up and service were top notch, from the contact to the repair and from the delay until the delivery.
• The Abs block is back together and the braking has regained all its power!"
• I do not usually leave a comment following a purchase on the internet, but there I do it without hesitation for my ABS block Hyundai Terracan: 5 stars thank you!

You have the option to make your payment with Paypal.