Kia Lotze - Repair abs pump

Principle of the ABS block

The ABS block and road safety

For the record, the ABS system was first developed for airplanes in the 1920s to prevent skidding on landing. The purpose of the ABS block in a car is to prevent, when the driver presses hard on the brake pedal, the wheels from locking up.

The ABS system quickly

The ABS block is an accessory to the general ABS system. It can be observed for the car manufacturer Kia Lotze ...

• The magnetic targets: they are in the form of a succession of north and south poles. The alternation of the poles changes the output signal.
• The ABS block: more details below.
• The wheel speed sensors: each of the sensors is placed in front of a rotating notched wheel, which generates a magnetic field variation and induces a sinusoidal signal.

The ABS block

The ABS block of the car manufacturer Kia Lotze consists of the following components, among others...

The hydraulic unit

It is composed of various components including:

• Solenoid valves, of which each wheel is equipped with an intake and an exhaust solenoid valve.
• The electronic distributor which modulates the pressure on the rear wheels.
• Pressure accumulators which are none other than pressurized gas tanks used to provide a large flow rate for a fairly short time.

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

The ECU

This is the part that receives the information that emanates from the brake pedal.

How to change the Kia Lotze ABS block?

How to recognize a defective ABS block.

This manifests itself most of the time as a result of... The car is unstable in wet driving conditions or an ABS sensor is out of order.

What are the services of Diag-Engine.co.uk?

Diag-Engine is a company expert in the reconditioning of the ABS block all types of models. Let's emphasize that Diag-Engine does not sell new ABS blocks.

What is the procedure?

As soon as we receive your part, we take care of its replacement and ship it to you 48 hours later.

The method of operation is quick: you choose the brand corresponding to your car, then the model and then the name of the manufacturer of the ABS block which corresponds to it. All you have to do is pay for this order and send us your problematic ABS block.

We are here to help you by tel or email if you have any doubts.

You can find our contact details at the bottom of the page.

Customer reviews

• The garage owner asked me 1200 € to replace my ABS block. Thanks to Diag-Engine, I got it for 400 €. Super thanks!"
• Very responsive and fast service. Just 8 days between sending and return colissimo after repair.
• When I received the ABS block of my Kia Lotze , I mounted the part myself. I was afraid to turn the ignition key, but ... miracle! no more ABS light!

Diag-Engine is at your disposal from Monday to Friday from 9am to 6pm.