Mercedes GLE Coupe C292 - Repair abs pump

An ABS block, what is it for?

What is the purpose of the ABS block?

For the record, anti-lock brakes were first developed for airplanes in the 1920s to prevent skidding on landing. The principle of the ABS system is rather well understood by the general public since it simply prevents the wheels from locking up when the driver presses the brake pedal a little roughly.

Focus on the ABS system

Before explaining the ABS block, it is necessary to understand the entire ABS system. So we discover for the Mercedes GLE Coupe C292 car ...

• The wheel speed sensors: there are 2 types, namely active sensors that are connected to the ABS ECU by a cable and passive sensors.
• The ABS block: more details below.
• The magnetic targets: they vary the output signal, which is in the form of a square signal of variable frequency.

The ABS block

Various elements of the ABS block of the Mercedes GLE Coupe C292 model to be discovered including:

The hydraulic unit

Here are some of the elements that constitute it...

• Electronic brakeforce distribution, which has an additional role managed by the ECU.
• Solenoid valves that eliminate the need for a brake compensator.
• Pressure accumulators, which are none other than pressurized gas reservoirs that can hold a variable volume of a pressurized fluid.

The ECU

It warns the driver of a malfunction by means of a lamp on the dashboard.

The engine driving a hydraulic pump

It is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The rotational speed of the motor is proportional to the flow rate that feeds it.

How to change Mercedes GLE Coupe C292 ABS block

Main manifestations of ABS block failure

It often occurs as a result of... The wheels lock up during emergency braking or the regulation of brake pressure is not done properly.

What does Diag-Engine.fr offer?

Diag-Engine is a company located in the department of Eure for many years and expert in the reconditioning of the ABS block of the brand Mercedes GLE Coupe C292 and others. Let's emphasize that Diag-Engine does not offer any new ABS block.

What is the procedure?

You need to locate the reference of your failed ABS block in order to order its repair. Then, all you have to do is pay for the part in your shopping cart after selecting the make and model of the automobile you own. Thus, send us your defective ABS block as soon as possible.

2 days are needed for your ABS block to be restored to working condition and then shipped to the address you have indicated.

The address to which you should send it to us is listed in the footer.

Don't worry, if you are not sure about the choice of ABS block, just ask us and we will let you know.

Some customer reviews

• The Abs block is reassembled and the brakes work as before!
• The installation of my ABS block was done by my mechanic! I hope the repair will be durable even though it has a lifetime warranty!
• Thank you for your fast and efficient service. The breakdown is gone. The CT could be favorable.

If you need help, our experts are at your disposal.