Principle of the ABS block

The ABS block, what is it?

Since 2003, the Highway Code provides that it is mandatory to have a functioning ABS block on every automobile. The anti-lock braking system, or ABS, is an assistance in case of emergency braking, it allows to keep control of the car by preventing the wheels from locking.

A valuable assistant: the ABS system

The ABS block is a part of the general ABS system. There are for the Mercedes GLS vehicle manufacturer ...

• Magnetic targets: they are represented as a sequence of north and south poles. The alternation of the poles varies the output signal.
• The ABS block: what are the elements that make it up? This is what we will discover ...
• The wheel speed sensors: there are 2 types, inductive sensors composed of a permanent magnet among others and active sensors.

The ABS block

In an ABS block of the vehicle manufacturer Mercedes GLS , we distinguish among others...

The computer

It informs the driver of a technical problem via a light on the dashboard.

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

The hydraulic unit

It consists of various elements including:

• Solenoid valves with the presence of ABS regulation on the rear wheels.
• A hydraulic pump whose action ejects the liquid accumulated in the accumulator to the master cylinder thus preventing the pedal from sinking.
• Pressure accumulators which are pressurized gas tanks used to provide a large flow rate for a short period of time.

How to repair Mercedes GLS ABS block

Main manifestations of ABS block failure

The reasons are various and those that often appear are: Wheels lock up during emergency braking or an electrical problem.

What does Diag-Engine offer?

Diag-Engine is a competent company in the repair of ABS block all types of models. Please note: Diag-Engine does not offer new ABS blocks.

What is the method of operation?

The repair of your ABS block and shipping is extremely fast.

The method of operation is simple: you select the make of your car, then the model, and then the brand of ABS block that corresponds to it. All you have to do is pay for that order and ship your failed ABS block to us.

The address you need to send it to us is listed at the bottom of the site.

Don't worry, if you have any doubts about the ABS block model, just contact us so we can tell you.

They trusted us

• Very responsive and fast service. Just 8 days between the shipment and the return in colissimo after repair.
• I sent my ABS block to Diag-Engine and all the follow-up and service were at the top, from the verbal exchange to the repair and from the delay until the delivery.
• I am not used to leave a comment when making a purchase, but there, I am very eager to do so I am happy for my ABS block Mercedes GLS: 5 stars thank you!

Make your payment with your CB through our secure module.