Principle of ABS block

Stability of the automobile with ABS block

The ABS block is an indispensable part of the safety of an automobile. In case of emergency braking, the ABS block allows the driver to maintain control of the automobile. Indeed, locking the wheels in such a situation would cause a slip on the road.

A valuable assistant: the ABS system

Before explaining the ABS block, it is necessary to identify the ABS system entirely. We distinguish for the Mercedes S-Class brand ...

• Wheel speed sensors: there are 2 types, namely active sensors operating through electronics, which are supplied via a voltage determined by the ABS computer and passive sensors.
• The ABS block: more details below.
• Magnetic targets: they are in the form of a series of north and south poles. Alternating the poles changes the output signal.

The ABS block

The ABS block of the Mercedes S-Class car manufacturer consists of, among other things, the following components...

The hydraulic unit

It is composed of various components including...

• Solenoid valves, of which each wheel has an inlet and an exhaust solenoid valve.
• A hydraulic pump, the delivery of which is the cause of the beats felt on the pedal.
• Pressure accumulators, which are none other than tanks of pressurized gas used to provide a large flow rate for a short period of time.

The ECU

It warns the driver of a malfunction by lighting a light on the dashboard.

The hydraulic motor

It transfers hydraulic energy into mechanical energy.

Mercedes S-Class ABS block reconditioning

Main manifestations of ABS block failure

The causes are varied, and the ones that appear most often are... The ABS light is on your dashboard or the brake pressure regulation is not working normally.

What does Diag-Engine.co.uk offer?

Diag-Engine is a company known for its expertise in Mercedes S-Class car parts and others. Therefore, you will not be able to buy new ABS blocks from Diag-Engine.

What is the procedure?

The refurbishment of your ABS block and shipping is extremely fast.

The principle of operation is extremely easy: you select the make of your car, then the model and finally the brand of ABS block that corresponds to it. All you have to do is order and ship us your broken ABS block.

Do you have a doubt? Contact us and we will help you.

The address where you need to send it to us is listed at the bottom of the page.

They are satisfied with Diag-Engine

• The mechanic asked me for €1200 to replace my ABS block. Thanks to Diag-Engine, I got it for only 350 €. Great thanks!"
• Thank you for your fast and efficient service. The breakdown has disappeared. The technical control could be favorable.
• I sent my ABS block to Diag-Engine and all the follow-up and service were at the rendezvous, from the contact to the repair and from the delay until the delivery.

Address yourself to a French company recognized for its expertise.