Nissan Juke - Repair abs pump

Principle of the ABS block

The stability of the car thanks to the ABS block

It is not always known, but the ABS system has been around since 1920 in the aviation industry to prevent airplanes from skidding on landing. The principle of the ABS system is rather well understood by the general public since it prevents the wheels from locking up when the driver presses the brake too hard.

The ABS system to prevent wheel lockup

Before explaining the ABS block, it is necessary to understand the entire ABS system. We discover for the Nissan Juke brand ...

• The wheel speed sensors: there are 2 types, the active sensors operating through electronics, which are powered by a voltage determined by the ABS computer and passive sensors.
• The ABS block: let's see precisely the elements that make it up below...
• The magnetic targets: they modify the output signal, which is in the form of a square signal of variable frequency.

The ABS block

Several elements of the Nissan Juke ABS block to know including...

The motor driving a hydraulic pump

This is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The motor's rotational speed is proportional to the flow rate that feeds it.

The ECU

It collects information from the brake pedal.

The hydraulic unit

It is composed of various components including:

• The electronic splitter that shades the pressure on the rear wheels.
• Pressure accumulators which are pressurized gas tanks used to provide a large flow rate for a short period of time.
• Solenoid valves with a presence of ABS regulation on the rear wheels.

Nissan Juke ABS block repair

Main manifestations of the failed ABS block

It often manifests itself following : The wheels lock up during heavy braking or the brake pressure regulation is not done properly.

What does the company Diag-Engine.fr offer?

Diag-Engine is a French company that has largely proven itself as far as its automotive know-how is concerned. Let's emphasize that Diag-Engine does not sell new ABS blocks.

How to proceed?

You have to note the reference of your defective ABS block in order to request its repair. Then, you just have to make your payment the part in your cart after selecting the make and model of car that belongs to you. Finally, send us your failed ABS block immediately afterwards.

A week is needed for you to get your ABS block back in working condition.

The address where you can send it is visible at the bottom of the website.

Don't hesitate to contact us, a technician will help you.

Some customer reviews

• I was given a quote of 1200 € to replace my ABS block. Thanks to Diag-Engine, I got it for only 350 €. Great thanks!"
• When I received the ABS block for my Nissan Juke , I mounted the part myself. I was afraid to turn the ignition key, but ... miracle! No more ringing!"
• I don't usually leave a comment when I make a purchase, but there, I'm very eager to do so I am happy for my Nissan Juke ABS block: 5 stars thank you!"

If you need help, our technicians are at your service.