Nissan NP300 - Repair abs pump

Principle of the ABS block

What is the purpose of the ABS block?

It was the German company Bosch that marketed a first electronic ABS system in the late 1970s. The principle of the ABS system is recognized as essential for road safety: it prevents the wheels from locking when the driver presses the brake pedal a little abruptly.

The ABS system quickly

The ABS block is part of the general ABS system. There are for the Nissan NP300 model ...

• The magnetic targets: they produce signals read by the sensors, which transmit these signals to the ABS computer.
• The ABS block: what are the elements that make it up? This is what we will discover ...
• The wheel speed sensors: there are 2 types, inductive sensors composed in particular of a coil and active sensors.

The ABS block

The ABS block of the Nissan NP300 brand is made up of the following elements in particular:

The computer

It receives the signal emanating directly from the brake pedal.

The hydraulic group

It is made up of several elements including...

• Pressure accumulators which are pressurized gas reservoirs used to provide a large flow rate for a fairly short time.
• A hydraulic pump whose discharge is the cause of the beats felt at the pedal.
• Solenoid valves, each wheel of which is equipped with an intake and an exhaust solenoid valve.

The hydraulic motor

It is a device that transforms a flow rate into a rotational speed and a pressure into operating torque. The motor's rotational speed is proportional to the flow rate that feeds it.

How to repair Nissan NP300 ABS block?

What are the symptoms of a failing ABS block?

It often manifests itself as a result of: The car lacks stability in wet driving conditions, an ABS sensor is out of order.

What are the services of the company Diag-Engine.fr?

Diag-Engine is a competent company in the repair of the ABS block all brands. Let us specify that Diag-Engine does not offer new ABS blocks.

Concretely...

As soon as we receive your part, we take care of its repair and ship it to you 2 days later.

You need to know the reference of your malfunctioning ABS block to order its repair. Then, you just have to pay for the part in your cart after selecting the make and model of vehicle you own. Finally, send us your malfunctioning ABS block immediately after.

The address where you can send it to us is listed at the bottom of the site.

Do you have any doubt? Contact us and we'll help.

Some customer reviews

• The installation of my ABS block was done by my mechanic! I hope the repair will be durable even though it has a lifetime warranty!
• The dealer asked me for 1200 € to replace my ABS block. By going through Diag-Engine, I got it for 400 €. Great thanks!"
• Thanks for your fast and efficient service. The breakdown has disappeared. The technical control could be favorable.

Did you know? A payment in several installments without charge is possible.