Nissan NV - Repair abs pump

What is the purpose of the ABS block?

ABS block and vehicle control

For the record, anti-lock braking has been around since 1920 in the aviation industry to prevent airplanes from skidding on landing. The ABS block refers to the principle of anti-lock wheels to stop, during a braking too sudden, that the wheels do not lock.

The ABS system to keep control of the car

Before explaining in detail the ABS block, it is necessary to understand the entire ABS system. We distinguish for the Nissan NV car ...

• The wheel speed sensors: there are 2 types, namely active sensors that are connected to the ABS computer via a cable and passive sensors.
• The ABS block: let's see precisely the elements that compose it below...
• The magnetic targets: they generate signals read by the sensors, which send these signals to the ABS ECU.

The ABS block

Let's take a look at some of the elements of the ABS block of the Nissan NV brand...

The motor driving a hydraulic pump

This is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The hydraulic unit

Many elements make it up including:

• Solenoid valves with a presence of ABS regulation on the rear wheels.
• The electronic brake distributor, which is an additional function managed by the ECU.
• Pressure accumulators, which are pressurized gas reservoirs that can hold a variable volume of a pressurized liquid.

The ECU

It receives the indication emanating directly from the brake pedal.

How to change the Nissan NV ABS block

How to recognize an ABS block that is out of order

Most of the time, it is one of two reasons... The wheels lock up during hard braking or a problem of an electrical nature.

What does Diag-Engine offer?

Diag-Engine is a company located in the department of Eure and is an expert in the reconditioning of the ABS block of the brand Nissan NV and others. So you will not be able to buy new ABS blocks from Diag-Engine.

What is the procedure?

As soon as we receive your part, we will take care of its reconditioning and send it back to you 48 hours later.

You have to note down the reference of your failed ABS block to order its repair. Then, all you have to do is pay for the part present in your cart after choosing the make and model of your car. Finally, send us your failed ABS block immediately after.

The address where you need to send it to us is visible at the bottom of the site.

We are here to help you by tel or email at the slightest hesitation.

Customer reviews

• The Abs block is now reassembled and the brakes work as before!
• I sent my ABS block to Diag-Engine and all the follow up and service were on point, from verbal exchange to repair and from the delay until delivery.
• The mechanic asked me 1000 € to replace my ABS block. Thanks to Diag-Engine, I got it for only 400 €. Great thanks !

Pay in installments or later with your credit card with the company Alma.