Nissan NV300 - Repair abs pump

How the ABS block works

What is the purpose of the ABS block?

The ABS block is a necessary part of an automobile's safety. In case of emergency braking, the ABS block allows the driver to keep control of the car. This is because locking the wheels in such circumstances would cause it to slide down the road.

Focus on the ABS system

Before explaining the ABS block, it is important to understand the ABS system completely. We can observe for the Nissan NV300 model ...

• Wheel speed sensors: there are 2 types, passive sensors composed of, among other things, a coil and active sensors.
• The ABS block: the following information allows us to understand the decisive role of this part.
• Magnetic targets: they are, depending on the vehicle models, directly integrated into the wheel bearings.

The ABS block

Let's look at the partial composition of the ABS block of the Nissan NV300 automobile:

The ECU

It receives information that emanates from each wheel sensor.

The motor driving a hydraulic pump

It is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The hydraulic unit

• A hydraulic pump whose action allows the liquid stored in the accumulator to be pumped back to the master cylinder.
• The electronic brake distributor, which is an additional function managed by the ECU.
• Solenoid valves that control the brake pressure of each wheel.

How to replace Nissan NV300 ABS block?

How to recognize an ABS block HS.

This manifests itself most of the time following... The car lacks stability on icy roads, an electrical problem.

What are the services of Diag-Engine.fr?

Diag-Engine is a competent company in the repair of ABS block all types of models. Let us specify that Diag-Engine does not offer any new ABS block.

What is the working mode?

As soon as we are in possession of your ABS block, a few days are enough to receive it functional again.

The working principle is very easy. You choose the brand corresponding to your vehicle, then the model and finally the brand of the ABS block whose inscription must appear on it. So all you have to do is order and send us your defective ABS block.

Do you have a doubt? Write to us and we will help you.

You can find the Diag-Engine workshop contact information at the bottom of the site.

Some customer feedback

• The dealer asked me for 1000 € to replace my ABS block. Going through Diag-Engine, it cost me only 350 €. Phew thank you!"
• Thank you for your fast and efficient service. The breakdown has disappeared. The technical control has validated.
• Service very responsive and fast. Just 8 days between sending and return colissimo after repair.

Pay in 4 times without charge and receive an immediate response.