Opel Corsa F - Repair abs pump

Understanding the principle of the ABS block

Why is the ABS block useful?

For the record, the ABS system was first developed for airplanes in the 1920s: it was necessary to prevent skidding on landing. The function of the ABS block in a car is to prevent, when the driver presses hard on the brake pedal, the wheels from locking.

A valuable aid: the ABS system

Before explaining the ABS block in detail, it is necessary to understand the ABS system completely. We can observe for the car manufacturer Opel Corsa F ...

• Wheel speed sensors: there are 2 types, namely active sensors operating through electronics, which are supplied via a voltage determined by the ABS computer and inductive sensors.
• Magnetic targets: they are, depending on the car models, integrated into the wheel bearings.
• The ABS block: let's see precisely the elements that make it up below...

The ABS block

The ABS block of the Opel Corsa F car is made up of the following elements in particular:

The ECU

It collects information that comes from each wheel sensor.

The hydraulic motor

It uses the flow of oil that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as the gearbox or another pump, etc.

The hydraulic unit

It is made up of various elements including...

• A hydraulic pump whose discharge is the cause of the beats felt on the pedal.
• Solenoid valves that regulate brake pressure for each wheel.
• Pressure accumulators which are pressurized gas reservoirs that can hold a variable volume of pressurized fluid.

The Opel Corsa F ABS Block Reconditioning

How do you know if an ABS block has failed?

Most of the time, it's for one reason or another... The ABS light is on on your dashboard or an ABS sensor is out of order.

What does Diag-Engine offer?

Diag-Engine is a company that is an expert in the replacement of the ABS block all types of models. Please note: Diag-Engine does not offer new ABS blocks.

Concretely...

7 days are enough for you to get your ABS block back in working condition.

The operating principle is quick: you select the make corresponding to your vehicle, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. All you have to do is pay for this order and send us your problematic ABS block.

Can't find the reference? Write to us and we will assist you.

The address where you can send it to us is indicated at the bottom of the site.

Customer reviews

• The Abs block is now back up and the braking has regained all its power!
• The dealer asked me for 1000 € to replace my ABS block. By going through Diag-Engine, I got it for only 380 €. Super thanks !
• When I received the ABS block of my Opel Corsa F , I mounted the part myself. I was afraid to turn the ignition key, but ... oh joy! no more ABS light!"

Pay in 3 times without charge and receive an immediate response.