Peugeot 307 - Repair of abs block
  • Peugeot 307 - Repair of abs block

Peugeot 307 - Repair abs pump

Peugeot 307 ABS pump repair within 24–48 hours at a fixed price of €396 Money-back guarantee and lifetime warranty included. Over 99.9% success rate on ABS pump repairs. Contact us via WhatsApp +33626664155 or email for more information.
€396.00 Tax included
(5/5) out of 6 total ratings
Read the reviews
Quantity

Réparation ABS Diag-engine

Car ABS pump repair procedure

ABS Repair Process for Peugeot 307 - €396 with Lifetime Warranty - Repair completed within 24–48 hours

Car ABS Repair Procedure

  • ✅ Add your car model to your cart and place your order on our secure website.
  • ✅ Print your invoice and carefully package your original ABS unit.
  • ✅ Send your ABS unit to us along with your invoice (shipping at your expense).
  • ✅ Once received, our technicians will repair your ABS unit within 24 to 48 hours.
  • ✅ We ship your repaired ABS unit back to you free of charge, ready for reinstallation.
  • ✅ All our repairs are covered by a lifetime warranty for your peace of mind.
  • ℹ️ Repairing your ABS unit allows you to keep your original factory-installed part. No coding, programming or vehicle adaptation is required for the reinstallation.
Repaired ABS pump, lifetime warranty included

Repairable ABS Pump Faults – Peugeot

  • Brake fluid remaining under pressure in one or more brake calipers
  • Brakes remaining under pressure after releasing the brake pedal
  • Braking issues without the ABS dashboard light turned on
  • Soft brake pedal that sinks or feels hard when pressed
  • Braking issues with the ABS dashboard light turned on
  • Bleeding impossible on one or more brake calipers
  • One or more wheels locking during braking
  • One or more wheels braking incorrectly
  • No braking pressure on one wheel
  • Vibrations felt during braking
  • Brake fluid leak
  • C1301 C1302 – Pressure sensor signal fault
  • C1380 C1381 C2116 21376 – Pump motor fault
  • C1350 – Internal solenoid valve relay fault
Repair your ABS unit ABS repair you can trust
Diag-Engine
329 Items

Data sheet

Brand
Peugeot
Model
307

Specific References

965913698010.0970-1128.310097011283

What is the ABS block?


What is the ABS block used for?


For the record, the ABS system was first developed for airplanes in the 1920s: it was necessary to prevent skidding on landing. The ABS block regulates the pressure of the hydraulic fluid that travels from the pedal to the brake calipers. Thanks to a sensor, installed on the wheels, the ABS block can thus release the pressure on the locked wheels, in order to give back the control of the vehicle to the driver.


The ABS system quickly


The ABS block is a part of the global ABS system. We can notice for the car Peugeot 307 ...


  • The magnetic targets: they modify the output signal which is in the form of a square signal of variable frequency.
  • The wheel speed sensors: there are 2 types, namely the inductive sensors composed in particular of a coil and the active sensors.
  • The ABS block: the technical details below allow to apprehend the importance of this part.

The ABS block


Many elements of the Peugeot 307 ABS block to discover including...


The ECU

It receives the signal emanating directly from the brake pedal.


The hydraulic motor

It uses the flow of oil that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as the reducer or the wheel, etc.


The hydraulic unit

Many elements make it up including:


  • Pressure accumulators which are pressurized gas reservoirs that can hold a variable volume of a pressurized liquid.
  • Electronic brakeforce distribution, which has an additional role managed by the ECU.
  • Solenoid valves that regulate the braking pressure for each wheel.

How to repair Peugeot 307 ABS block?


What are the symptoms of a failing ABS block?


Most of the time, it is one of two reasons... The vehicle lacks stability on wet roads or a concern of an electrical nature.


What does Diag-Engine.fr offer?


Diag-Engine is a company that is an expert in the reconditioning of the ABS block all types of models. Please note: Diag-Engine does not sell any new ABS blocks.


What is the procedure?


The principle of operation is very quick. You select the make of your car, then the model and then the name of the manufacturer of the ABS block that corresponds to it. All you have to do is pay for this order and send us your malfunctioning ABS block.


2 days are needed for your ABS block to be restored to working order and then sent to your home.


The address to which you must send it to us is indicated in the footer of the site.


Don't hesitate to contact us, a technician will assist you.


They trusted us


The Diag-Engine company is pleased to have several thousand reviews from individuals and mechanics delighted with their ABS block.
  • The installation of my ABS block was done by my garage! I hope the repair will be durable even though it has a lifetime warranty!
  • When I received the ABS block for my Peugeot 307 , I installed the part myself. I was afraid to start, but ... miracle! no more ABS light!"
  • I sent my ABS block to Diag-Engine and all the follow-up and service were at the rendezvous, from the contact to the repair and from the delay until the delivery.

Use the chat window to submit your question to us at the store opening hours.


We repair the entire car or motorcycle abs block which our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs ECU - abs box - abs kit - hydraulic unit - abs esp block. Please note that we do not sell new or second hand products!