Renault Twingo 2 - Repair abs pump

How does an ABS block work?

Automotive stability through ABS block

It is not always known, but the ABS system was first developed for airplanes in the 1920s to prevent skidding on landing. The function of the ABS block in a car is to prevent, when the driver presses hard on the brake pedal, the wheels from locking up.

The ABS system to prevent wheel lockup

The ABS block is a part of the overall ABS system. We can notice for the car manufacturer Renault Twingo 2 ...

• Magnetic targets: they are sometimes integrated into the wheel bearings.
• The ABS block: more details below.
• Wheel speed sensors: each of the sensors is placed in front of a target, namely a notched wheel also called phonic wheel.

The ABS block

The ABS block of the Renault Twingo 2 automobile is made up of the following components, among others:

The hydraulic unit

Many components make it up including:

• Solenoid valves of which each wheel is equipped with an intake solenoid and an exhaust solenoid valve.
• The electronic splitter which shades the pressure on the rear wheels.
• Pressure accumulators which are nothing but pressurized gas tanks used to provide a large flow rate for a short period of time.

The ECU

Each time a wheel locks up, it controls the solenoid valves and the hydraulic pump.

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

Renault Twingo 2 ABS block reconditioning

How do you know if an ABS block is defective?

There are many causes, and the ones that show up most of the time are : The car is unstable on icy road or a concern of electrical nature.

What are the services of Diag-Engine.fr?

Diag-Engine is a competent company in the repair of ABS block all types of models. Let's emphasize that Diag-Engine does not sell any new ABS block.

What is the mode of operation?

You need to know the reference of your defective ABS block to request its repair. Then, all you have to do is pay for the part in your shopping cart after selecting the make and model of your car. Finally, send us your failed ABS block as soon as possible.

48 hours is enough for your ABS block to be repaired and then sent to the place of your choice.

Don't worry, if you are not sure about the model of the ABS block, just contact us so that we can tell you.

The address to which you should send it is visible in the footer of the site.

They trusted us

• The Abs block is reassembled and the brakes are working as before!
• Thank you for your fast and efficient service. The fault is gone. The CT validated.
• I was given a quote of 1200 € to replace my ABS block. Thanks to Diag-Engine, it cost me 380 €. Super thank you!"

Call a French company known for its expertise.