Toyota COMS - Repair of abs block
  • Toyota COMS - Repair of abs block

Toyota COMS - Repair abs pump

Repair your ABS Pump Toyota COMS within 24/48 hours at a cost of 396 Euros. Our service is Money Back Guaranteed with a lifetime warranty. We repair the 99.9% of ABS Blocks. Contact us for more information!
€396.00 Tax included
Il n'y a pas encore d'avis.
Quantity

Toyota COMS ABS pump Repair Service

Procedure:

red-cross-1-en.jpg We offer a repair service for your ESP ABS pump

red-cross-1-en.jpg Place an order on the site by selecting your model, print your invoice and then send us your original ABS pump well protected by enclosing the invoice in the parcel, shipping is at your expense, the return is free.

red-cross-1-en.jpg We process ABS pump repairs in 48 hours upon receipt.

red-cross-1-en.jpg All repairs are guaranteed for life.

red-cross-1-en.jpg Repairable defects in the list below

Fondw2-en.jpg

Defects:

red-cross-1-en.jpg - No brake pressure on one wheel

red-cross-1-en.jpg - Brakes remain pressurized

red-cross-1-en.jpg - Brake fluid leak

red-cross-1-en.jpg - Soft brake pedal

red-cross-1-en.jpg - C146C C146D Pump motor failure

red-cross-1-en.jpg - C1246 Brake pressure sensor fault

red-cross-1-en.jpg - C0279 C1361 C0279 Internal Solenoid Valve Relay Fault

red-cross-1-en.jpg - C1073 C2116 Pump Motor Circuit

red-cross-1-en.jpg - C121D C121E Brake pressure sensor fault

red-cross-1-en.jpg - C1251 Pump motor relay

red-cross-1-en.jpg - C1223 Pump Motor Relay

red-cross-1-en.jpg - 55 Pump Motor Relay

- 56 Pump Motor Relay

contactbas-en.jpg

Diag-Engine
330 Items

Data sheet

Brand
Toyota
Model
COMS

Specific References

An ABS block, what is it for?


Why is the ABS block essential?


For the record, the ABS system has been around since 1920 in the airline industry to prevent airplanes from skidding on landing. The anti-lock braking system, or ABS, is an emergency braking assistance, it allows you to maintain control of the car by preventing the wheels from locking.


Focus on the ABS system


The ABS block is an accessory of the overall ABS system. It is discovered for the Toyota COMS car ...


  • The wheel speed sensors: they measure the speed of rotation of the wheels from 0 km/h.
  • The ABS block: the technical details below help to understand the importance of this accessory.
  • The magnetic targets: they are, depending on the vehicle models, integrated into the wheel bearings.

The ABS block


The Toyota COMS ABS block consists of the following components, among others...


The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.


The hydraulic unit

It consists of several components including...


  • Solenoid valves with each impeller having an inlet and an outlet solenoid valve.
  • The electronic brakeforce distribution, which has an additional role managed by the ECU.
  • A hydraulic pump whose discharge is the cause of the vibrations felt at the pedal.

The ECU

It receives information that emanates from each of the wheel sensors.


How to repair the Toyota COMS ABS block?


What are the symptoms of an ABS block that is out of order?


It is quite often one of two reasons: The car is unstable in wet driving conditions or an electrical concern.


What are the services of the company Diag-Engine.fr?


Diag-Engine is a company that specializes in the replacement of the ABS block of all kinds of models. It is important to understand that Diag-Engine does not sell new ABS blocks.


What is the procedure?


48 hours are needed for your ABS block to be functional again and shipped to the address you specified.


The method of operation is very fast: you select the brand corresponding to your car, then the model and then the brand of the ABS block whose inscription must appear on it. So all you have to do is pay for this order and send us your problematic ABS block.


The address you need to send it to is listed at the bottom.


Do you have any doubts? Contact us and we'll help.


They trusted us


Some customers were keen to testify for the replacement of their ABS block.
  • I was given an estimate of 1200 € to replace my ABS block. With Diag-Engine, it cost me 350 €. Phew thank you !
  • Thank you for your fast and efficient service. The failure has disappeared. The technical control has validated.
  • Service very responsive and fast. Just 8 days between sending and return colissimo after repair.

You have the option to make your payment with Paypal.


We repair the whole abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!