Toyota Crown Majesta - Repair abs pump

Focus on the ABS block

Vehicle stability thanks to the ABS block

It was the German company Bosch that marketed a first version of the ABS block in the late 1970s. The principle of the ABS system is now known to all because it prevents the wheels from locking when the driver abruptly presses the brake.

A valuable assistant: the ABS system

Before discussing the ABS block, it is important to understand the ABS system completely. We distinguish in Toyota Crown Majesta ...

• The ABS block: the following information helps to understand the importance of this element.
• The magnetic targets: they vary the output signal which takes the appearance of a square signal of variable frequency.
• The wheel speed sensors: each sensor is placed in front of a target, namely a gear wheel that is also called phonic wheel.

The ABS block

Various elements of the ABS block due to car manufacturer Toyota Crown Majesta to be apprehended of which:

The ECU

It warns the driver of a technical problem via a specific indicator on the dashboard.

The hydraulic unit

• The electronic brake force distribution, which is an additional function managed by the ECU.
• A hydraulic pump whose discharge is the cause of the swirls felt under the foot.
• Solenoid valves of which each wheel has an intake solenoid valve and an exhaust solenoid valve.

The motor driving a hydraulic pump

This is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The rotational speed of the motor is proportional to the flow rate that feeds it.

How to replace Toyota Crown Majesta ABS block?

Main manifestations of defective ABS block

This manifests itself mostly as a result of... Wheels lock up during heavy braking, brake pressure regulation does not work normally.

What are the services of Diag-Engine company?

Diag-Engine is a competent company in the replacement of ABS block all types of models. Therefore, you will not be able to buy new ABS blocks from Diag-Engine.

How does it work?

48 hours is enough for your ABS block to be repaired and sent to the place of your choice.

The principle of operation is relatively fast: you select the brand of your car, then the model and then the name of the manufacturer of the ABS block that corresponds to it. All you have to do now is to proceed to the purchase and send to Diag-Engine your broken ABS block.

Don't worry, if you have any doubts about the ABS block model, just contact us and we'll let you know.

You'll find our address at the bottom of the site.

Customer reviews

• The Abs block is now reassembled and the braking has regained all its power!"
• I was asked for 1400 € to replace my ABS block. By going through Diag-Engine, I got it for only 400 €. Great thanks!"
• Very responsive and fast service. Just 8 days between sending and return colissimo after repair.

Call a French company known for its expertise.