Toyota MR-S - Repair of abs block
  • Toyota MR-S - Repair of abs block

Toyota MR-S - Repair abs pump

Toyota MR-S ABS pump repair within 24–48 hours at a fixed price of €396 Money-back guarantee and lifetime warranty included. Over 99.9% success rate on ABS pump repairs. Contact us via WhatsApp +33626664155 or email for more information.
€ 396,00 Inclusief belasting
Il n'y a pas encore d'avis.
Aantal

Réparation ABS Diag-engine

Car ABS pump repair procedure

ABS Repair Process for Toyota MR-S - €396 with Lifetime Warranty - Repair completed within 24–48 hours

Car ABS Repair Procedure

  • ✅ Add your car model to your cart and place your order on our secure website.
  • ✅ Print your invoice and carefully package your original ABS unit.
  • ✅ Send your ABS unit to us along with your invoice (shipping at your expense).
  • ✅ Once received, our technicians will repair your ABS unit within 24 to 48 hours.
  • ✅ We ship your repaired ABS unit back to you free of charge, ready for reinstallation.
  • ✅ All our repairs are covered by a lifetime warranty for your peace of mind.
  • ℹ️ Repairing your ABS unit allows you to keep your original factory-installed part. No coding, programming or vehicle adaptation is required for the reinstallation.
Repaired ABS pump, lifetime warranty included

Repairable ABS Pump Faults – Toyota

  • Brake fluid remaining under pressure in one or more brake calipers
  • Brakes remaining under pressure after releasing the brake pedal
  • Braking issues without the ABS dashboard light turned on
  • Soft brake pedal that sinks or feels hard when pressed
  • Braking issues with the ABS dashboard light turned on
  • Bleeding impossible on one or more brake calipers
  • One or more wheels locking during braking
  • One or more wheels braking incorrectly
  • No braking pressure on one wheel
  • Vibrations felt during braking
  • Brake fluid leak
  • C146C C146D – Pump motor fault
  • C1246 – Brake pressure sensor fault
  • C0279 C1361 C0279 – Internal solenoid valve relay fault
  • C1073 C2116 – Pump motor circuit fault
  • C121D C121E – Brake pressure sensor fault
  • C1251 – Pump motor relay fault
  • C1223 – Pump motor relay fault
  • 55 – Pump motor relay fault
  • 56 – Pump motor relay fault
  • C0273 – Open circuit in ABS pump motor relay circuit
  • C0274 – Open circuit in ABS pump motor relay circuit
Repair your ABS unit ABS repair you can trust
Diag-Engine
330 Items

Datasheet

Brand
Toyota
Model
MR-S

Specifieke referenties

How the ABS block works


What is the ABS block?


For the record, anti-lock braking systems have been around since 1920 in the aviation industry to prevent planes from skidding on landing. The ABS block refers to the anti-lock wheel system to prevent, during emergency braking, that the wheels do not lock.


A valuable assistant: the ABS system


Before explaining the ABS block, it is necessary to understand the ABS system completely. We can notice for the car manufacturer Toyota MR-S ...


  • Magnetic targets: they are, depending on the car models, integrated into the wheel bearings.
  • The ABS block: let's see in more detail the elements that compose it below...
  • The wheel speed sensors: there are 2 types, inductive sensors composed in particular of a permanent magnet and active sensors.

The ABS block


Let's look at the partial composition of the Toyota MR-S ABS block ...


The computer

It receives information that emanates from each of the wheel sensors.


The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.


The hydraulic unit

It is composed of several elements including:


  • Solenoid valves with the presence of ABS regulation on the rear wheels.
  • The electronic brakeforce distribution, which has an additional role managed by the ECU.
  • A hydraulic pump whose delivery causes the swirls felt at the pedal.

How to change the Toyota MR-S ABS block?


How to know if an ABS block is failing.


The reasons are varied and those that often occur are: The wheels lock up during hard braking or the brake pressure regulation is not working normally.


What does Diag-Engine offer?


Diag-Engine is a company that is an expert in repairing the ABS block all types of models. It is important to understand that Diag-Engine does not offer any new ABS blocks.


What is the procedure?


The operating principle is extremely easy. You choose the make of your car, then the model and then the name of the manufacturer of the ABS block that corresponds to it. All you have to do is order and send us your problematic ABS block.


7 days are needed for you to receive your ABS block in perfect condition.


You can find our address in the footer.


Don't find the part number? Contact us and we will assist you.


Some customer reviews


Diag-Engine is proud to receive many returns from individuals and professionals delighted with their ABS block.
  • The garage owner gave me a 1400 € quote to replace my ABS block. Thanks to Diag-Engine, it cost me only 380 €. Great thanks!"
  • When I received the ABS block for my Toyota MR-S , I mounted the part myself. I was afraid to start, but... oh joy! No more ringing!"
  • Thank you for your fast and efficient service. the ABS light on disappeared. The technical control has validated.

Diag-Engine is at your disposal from Monday to Friday from 9am to 6pm.


We repair the whole abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!