Toyota Pixis Joy - Repair abs pump

What is the ABS block?

What is the purpose of the ABS block?

It was the German company Bosch that marketed a first electronic ABS system in the late 1970s. The principle of the ABS system is recognized as being essential for road safety since it simply prevents the wheels from locking when the driver abruptly presses the brake.

The ABS system quickly

Before explaining the ABS block, it is important to understand the entire ABS system. We can observe for the car manufacturer Toyota Pixis Joy ...

• The wheel speed sensors: each of the sensors is placed in front of a gear that induces a sinusoidal signal whose quality depends on the speed of rotation of the wheels.
• The ABS block: how is it composed? Let's see it in more detail below ...
• The magnetic targets: they are represented as a series of north and south poles. The alternation of the poles varies the output signal.

The ABS block

Let's look at the partial composition of the ABS block of the Toyota Pixis Joy car manufacturer:

The hydraulic unit

Many elements make it up including...

• Pressure accumulators, which are none other than pressurized gas reservoirs used to provide a large flow rate for a fairly short period of time.
• The electronic brake force distribution, which is an additional function managed by the ECU.
• A hydraulic pump that allows the fluid stored in the accumulator to be pumped back to the master cylinder thus preventing the pedal from depressing.

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

The ECU

It receives information from each wheel sensor.

The Toyota Pixis Joy ABS block replacement

What are the symptoms of a failing ABS block?

It is quite often one of two reasons... The car lacks stability in wet driving conditions or an electrical concern.

What does Diag-Engine offer?

Diag-Engine is a company that has been established in the Eure department for many years and specializes in the repair of the ABS block of the brand Toyota Pixis Joy and others. So you will not be able to buy new ABS blocks from Diag-Engine.

Concretely...

As soon as we receive your part, we will take care of its replacement and ship it to you 48 hours later.

The method of operation is relatively simple: you choose the make of your car, then the model and finally the name of the manufacturer of the ABS block, whose inscription must appear on it. Thus you only have to order and send to Diag-Engine your ABS block in failure.

You will find our contact information in the footer of the site.

Don't worry, if you have the slightest doubt about the choice of the ABS block, just ask us and we will tell you.

They are satisfied with the Diag-Engine company

• The dealer asked me for 1000 € to replace my ABS block. Going through Diag-Engine, it cost me only 380 €. Great thanks!"
• Thank you for your fast and efficient service. The breakdown has disappeared. The CT was able to be favorable.
• The Abs block is back up and the braking has regained all its power!

Address yourself to a French company known for its expertise.