Toyota Pixis Van - Repair abs pump

What is an ABS block?

An ABS block and vehicle control

The German company Bosch designed the first version of an ABS block in the late 1970s. In the event of emergency braking, the ABS block allows the driver to maintain control of his car. Because locking the wheels in such circumstances would cause the car to slip on the road.

A valuable aid: the ABS system

Before explaining the ABS block, it is necessary to understand the ABS system in its entirety. There are for the vehicle manufacturer Toyota Pixis Van ...

• Magnetic targets: they are, depending on the vehicle models, integrated into the wheel bearings.
• The ABS block: let's see precisely the elements that make it up below...
• Wheel speed sensors: each sensor is placed in front of a target, that is, a notched wheel that is also called phonic wheel.

The ABS block

The ABS block of the car manufacturer Toyota Pixis Van consists of the following elements, among others:

The motor driving a hydraulic pump

This is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The motor's rotational speed is proportional to the flow rate that feeds it.

The ECU

It informs the driver of a technical problem by lighting up a specific light on the dashboard.

The hydraulic unit

It is made up of various components including:

• Solenoid valves, each wheel of which is equipped with an intake and an exhaust solenoid valve.
• A hydraulic pump that ejects the liquid accumulated in the accumulator to the master cylinder thus preventing the pedal from sinking.
• The electronic brake distributor, which has an additional role managed by the ECU.

How to repair the Toyota Pixis Van ABS block.

How to tell if an ABS block is out of order.

There are many causes, and the ones that show up most of the time are... Wheels locking up during heavy braking or brake pressure regulation not working properly.

What does Diag-Engine offer?

Diag-Engine is a company known for its expertise in Toyota Pixis Van and other auto parts. It is important to understand that Diag-Engine does not offer any new ABS blocks.

What is the procedure to follow?

From the moment we receive your ABS block, just wait for a few days for you to receive it back in working order.

You have to note the reference of your defective ABS block to request its repair. Then you just have to make your payment the part in your cart after selecting the make and model of car you own. Thus, send us your failed ABS block immediately after.

You will find our contact information in the footer.

Don't worry, if you are not sure about the choice of the ABS block, you just have to contact us so that we communicate it to you.

They are happy with Diag-Engine.fr

• The Abs block is now reassembled and the braking has regained all its power!"
• The dealer asked me for 1000 € to replace my ABS block. With Diag-Engine, I got it for 380 €. I sent my ABS block to Diag-Engine and all the follow-up and service were there, from the verbal exchange to the repair and from the delay to the delivery.

Did you know? Payment in installments and free of charge is possible.