Toyota ProAce - Repair abs pump

What is an ABS block

The ABS block and road safety

It is not always known, but the anti-lock braking system was first developed for airplanes in the 1920s: it was necessary to avoid skidding on landing. The principle of the ABS system is rather well understood by the general public: it prevents the wheels from locking up when the driver presses the brake a little roughly.

Focus on the ABS system

Before discussing the ABS block, it is important to understand the ABS system completely. So we discover for the Toyota ProAce automobile ...

• The wheel speed sensors: each sensor is placed in front of a rotating gear that generates a magnetic field variation and induces a sinusoidal signal.
• The magnetic targets: they produce signals read by the sensors, which send these signals to the ABS computer.
• The ABS block: let's take a closer look at its components below...

The ABS block

The ABS block of the Toyota ProAce vehicle consists of the following components, among others:

The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.

The ECU

It informs the driver of a technical problem with a light on the dashboard.

The hydraulic unit

Here are some of its components:

• The electronic splitter that shades the pressure on the rear wheels.
• Solenoid valves with the presence of ABS regulation on the rear wheels.
• A hydraulic pump that prevents the pedal from depressing during ABS regulation.

How to repair Toyota ProAce ABS block

How to recognize an ABS block that is out of order

This is most often manifested following: The ABS light is on on your dashboard or an electrical problem.

What does Diag-Engine.fr offer?

Diag-Engine is a French company that has largely proven itself regarding its automotive expertise. Let us specify that Diag-Engine does not offer any new ABS block.

What is the procedure?

As soon as we receive your part, we take care of its repair and ship it to you 48 hours later.

The principle of operation is very simple. You choose the brand of your car, then the model and finally the brand of the ABS block whose inscription must appear on it. So you just have to go to the purchase and send us your failing ABS block.

Do not hesitate to contact us, a specialist will help you.

You will find the address of the Diag-Engine workshop in the footer.

They trusted us

• The dealer gave me a quote of 1000 € to replace my ABS block. With Diag-Engine, it only cost me €400. Great thanks !
• The Abs block is now reassembled and the brakes work as before !
• When I received the ABS block for my Toyota ProAce , I mounted the part myself. I was afraid to turn the ignition key, but ... miracle! no more warning triangle!"

If you need help, our technicians are at your service.