Toyota Raum - Repair abs pump

Principle of the ABS block

The ABS block and road safety

It was the Bosch company that developed an early version of the ABS block in the late 1970s. In case of emergency braking, the ABS block allows the driver to maintain control of his car. This is because locking the wheels in such a situation would cause the car to slip on the road.

The ABS system to prevent wheel lockup

The ABS block is a part of the overall ABS system. There are for the car manufacturer Toyota Raum ...

• Wheel speed sensors: there are 2 types, active sensors that are connected to the ABS computer via a cable and inductive sensors.
• Magnetic targets: they are represented as a sequence of north and south poles. The alternation of the poles changes the output signal.
• The ABS block: let's see precisely the elements that make it up below...

The ABS block

In a Toyota Raum ABS block, we observe in particular...

The hydraulic motor

This is an organ that transforms a flow rate into rotational speed and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The hydraulic unit

• Solenoid valves that limit the pressure of the brakes of each wheel.
• The electronic brake distributor, which is an additional function managed by the ECU.
• A hydraulic pump that allows the fluid stored in the accumulator to be pumped back to the master cylinder thus preventing the pedal from depressing.

The ECU

It collects a signal that emanates from the brake pedal.

The Toyota Raum ABS block replacement

Main manifestations of the faulty ABS block

The causes are various and the ones that often manifest themselves are... The wheels lock up during heavy braking or an ABS sensor is defective.

What does the company Diag-Engine offer?

Diag-Engine is a competent company in the reconditioning of the ABS block all brands. Therefore, you will not be able to buy new ABS blocks from Diag-Engine.

What is the procedure?

You need to know the reference of your failed ABS block in order to request its repair. Then, you just have to make your payment the part present in your cart after selecting the make and model of vehicle you own. Thus, send us your failed ABS block as soon as possible.

48 hours is enough for your ABS block to be functional again and sent to the address you have indicated.

The address to which you must send it to us is visible at the bottom of the page.

By email or by tel, you can contact us during working hours.

They are satisfied with the company Diag-Engine

• I am not used to leaving a review following a purchase, but here I am doing it without hesitation for my Toyota Raum ABS block: 5 stars thank you!"
• Thank you for your fast and efficient service. The failure has disappeared. The technical control has validated.
• The Abs block is now reassembled and the brakes work as before!

If you need help, our technicians are at your disposal.