Volkswagen Amarok - Repair abs pump

An ABS block, what is it for?

Why is the ABS block useful?

It was the German company Bosch that developed the first version of ABS block in the late 1970s. The function of the ABS block in a car is to prevent, when the motorist brakes suddenly, that the wheels do not lock.

A valuable aid: the ABS system

Before talking about the ABS block, it is necessary to understand the ABS system entirely. There we discover in Volkswagen Amarok ...

• Magnetic targets: they vary the output signal, which takes the appearance of a square signal of variable frequency.
• The ABS block: more details below.
• Wheel speed sensors: there are 2 types, active sensors that are fed by the ABS ECU through a cable and inductive sensors.

The ABS block

Many elements of the ABS block of the Volkswagen Amarok model to be understood including:

The motor driving a hydraulic pump

It uses the oil flow that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as for example the reducer or fan, etc.

The ECU

This is the part that receives the signal directly from the brake pedal.

The hydraulic unit

Here are some of the components that make it up...

• A hydraulic pump whose discharge is the cause of the swirls felt at the pedal.
• Solenoid valves that eliminate the need for a brake compensator.
• Pressure accumulators that are pressurized gas tanks that can hold a variable volume of a pressurized liquid.

The Volkswagen Amarok ABS Block Reconditioning

Main manifestations of ABS block failure

This often manifests itself as a result of: The car lacks stability on wet roads or a problem of an electrical nature.

What are the services of Diag-Engine.fr?

Diag-Engine is a company established in the department of Eure for many years and expert in the repair of the ABS block of the brand Volkswagen Amarok and others. Therefore, you will not find new ABS blocks at Diag-Engine.

How does it work?

As soon as we are in possession of your ABS block, just wait a few days to receive it back in working order.

The principle of operation is quick. You select the make corresponding to your vehicle, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. Then you only have to pay for this order and ship us your broken ABS block.

The address where you can send it is listed at the bottom of the site.

By email or tel, you can contact us during business hours.

They trusted us

• The dealer asked me 1400 € to replace my ABS block. Going through Diag-Engine, it cost me 350 €. Super thank you!"
• The Abs block is back up and the braking has regained all its power!"
• Thank you for your fast and efficient service. the ABS light on disappeared. The technical control has validated.

Important! Payment in installments without charge is possible.