Volkswagen Polo GTI 5 - Repair of abs block
  • Volkswagen Polo GTI 5 - Repair of abs block

Volkswagen Polo GTI 5 - Repair abs pump

Volkswagen Polo GTI 5 ABS pump repair within 24–48 hours at a fixed price of €396 Money-back guarantee and lifetime warranty included. Over 99.9% success rate on ABS pump repairs. Contact us via WhatsApp +33626664155 or email for more information.
€396.00 Tax included
Il n'y a pas encore d'avis.
Quantity

Réparation ABS Diag-engine

Car ABS pump repair procedure

ABS Repair Process for Volkswagen Polo GTI 5 - €396 with Lifetime Warranty - Repair completed within 24–48 hours

Car ABS Repair Procedure

  • ✅ Add your car model to your cart and place your order on our secure website.
  • ✅ Print your invoice and carefully package your original ABS unit.
  • ✅ Send your ABS unit to us along with your invoice (shipping at your expense).
  • ✅ Once received, our technicians will repair your ABS unit within 24 to 48 hours.
  • ✅ We ship your repaired ABS unit back to you free of charge, ready for reinstallation.
  • ✅ All our repairs are covered by a lifetime warranty for your peace of mind.
  • ℹ️ Repairing your ABS unit allows you to keep your original factory-installed part. No coding, programming or vehicle adaptation is required for the reinstallation.
Repaired ABS pump, lifetime warranty included

Repairable ABS Pump Faults – Volkswagen

  • Brake fluid remaining under pressure in one or more brake calipers
  • Brakes remaining under pressure after releasing the brake pedal
  • Braking issues without the ABS dashboard light turned on
  • Soft brake pedal that sinks or feels hard when pressed
  • Braking issues with the ABS dashboard light turned on
  • Bleeding impossible on one or more brake calipers
  • One or more wheels locking during braking
  • One or more wheels braking incorrectly
  • No braking pressure on one wheel
  • Vibrations felt during braking
  • Brake fluid leak
  • 01276 04FC – ABS hydraulic pump (V64)
  • 16352 3FE0 – Internal electronic fault
  • 16349 3FDD – Internal electronic fault
  • 16355 3FE3 – Internal electronic fault
  • 01435 059B – G201 brake pressure sensor
  • 01130 1130 046A – Implausible signal
Repair your ABS unit ABS repair you can trust
Diag-Engine
330 Items

Data sheet

Brand
Volkswagen
Model
Polo GTI 5

Specific References

What is the purpose of the ABS block?


ABS block and car control


For the record, anti-lock braking was first developed for airplanes in the 1920s: it was necessary to prevent skidding on landing. The principle of the ABS system is rather well understood by the general public because it prevents the wheels from locking up when the driver abruptly presses the brake pedal.


The ABS system to prevent wheel lockup


Before explaining the ABS block in detail, it is important to understand the ABS system entirely. So we find out for the Volkswagen Polo GTI 5 vehicle ...


  • The ABS block: how is it composed? This is what we will discover ...
  • The magnetic targets: they are, depending on the car model, integrated into the wheel bearings.
  • The wheel speed sensors: there are 2 types, the active sensors operating through electronics, which are powered by a voltage defined by the ABS computer and passive sensors.

The ABS block


The ABS block of the Volkswagen Polo GTI 5 model consists of, among others, the following elements...


The motor driving a hydraulic pump

It transfers hydraulic energy into mechanical energy.


The ECU

It warns the driver of a technical problem with the help of a light on the dashboard.


The hydraulic unit

Here are some of the components that make it up...


  • A hydraulic pump that locks the brake pedal so it doesn't dig in.
  • Solenoid valves that regulate the braking pressure of each wheel.
  • Electronic brakeforce distribution, which has an additional role managed by the ECU.

The Volkswagen Polo GTI 5 ABS unit reconditioning


How do you know if an ABS unit is out of order?


Most of the time, it is one or the other reason: The car is unstable on wet roads, the brake pressure regulation is not working properly.


What does the company Diag-Engine offer?


Diag-Engine is a French company that has largely proven itself in terms of its automotive expertise. It is important to understand that Diag-Engine does not offer any new ABS blocks.


How it works?


The principle of operation is extremely easy. You select the brand corresponding to your car, then the model and then the brand of ABS block that corresponds to it. All that's left is to proceed to purchase and send your problematic ABS block to Diag-Engine.


The refurbishment of your ABS block and shipping is fast.


Don't worry, if you have any doubts about the model of the ABS block, just ask us so that we can tell you.


The address to which you should send it is listed at the bottom of the page.


Customer feedback


Discover authentic feedback from individuals and garages for their ABS block replacement.
  • The garage owner gave me an estimate of €1100 to replace my ABS block. With Diag-Engine, I got it for 400 €. Thank you!"
  • Very responsive and fast service. Just 8 days between sending and return colissimo after repair.
  • I sent my ABS block to Diag-Engine and all the follow-up and service were at the rendezvous, from the contact to the repair and the delay until delivery.

If you need help, our technicians are at your disposal.


We repair the whole car or motorcycle abs block that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!