- There are no more items in your cart
- Shipping
- Total €0.00
Honda Crosstour - Repair abs pump
Honda Crosstour ABS pump Repair Service
Procedure:
We offer a repair service for your ESP ABS pump
Place your order on the site by selecting your model, print your invoice and then send us your original ABS pump well protected by attaching the invoice in the package, shipping is at your expense, return is free.
We process ABS pump repairs within 48 hours of receipt.
All repairs are guaranteed for life.
Repairable defects in the list below
Defects:
- No brake pressure on one wheel
- Brakes remain pressurized
- Brake fluid leakage
- Soft brake pedal
- 52-1 Pump motor circuit
- 66-01 Brake pressure sensor fault
An ABS block, what is it for?
Definition of ABS block
The ABS is mandatory in Europe since 2003. It works through sensors, an ECU and a hydraulic control system. The ABS block refers to the anti-lock wheel system to prevent, when braking with the foot on the floor, that the wheels lock.
A valuable assistant: the ABS system
The ABS block is an accessory of the overall ABS system. We distinguish for the Honda Crosstour vehicle ...
- The wheel speed sensors: each of the sensors is placed in front of a rotating gear that generates a magnetic field variation and induces a sinusoidal signal.
- The ABS block: let's see in more detail the elements that compose it below...
- The magnetic targets: they are, depending on the car models, integrated into the wheel bearings.
The ABS block
Let's see the non-exhaustive structure of the ABS block of the car manufacturer Honda Crosstour...
The hydraulic unit
- Pressure accumulators which are pressurized gas reservoirs that are used to provide a large flow rate for a short time.
- The electronic splitter that shades the pressure on the rear wheels.
- Solenoid valves of which each wheel has an intake and an exhaust solenoid valve.
The motor driving a hydraulic pump
It transfers hydraulic energy into mechanical energy.
The ECU
It collects information from each wheel sensor.
The Honda Crosstour ABS block replacement
What are the symptoms of a failing ABS block?
It is quite often one of two reasons... The ABS light is on your dashboard or the regulation of the brake pressure is not done normally.
What are the services of the company Diag-Engine.fr?
Diag-Engine is a company located in the Eure and specialized in the reconditioning of the ABS block of the brand Honda Crosstour and others. Let us specify that Diag-Engine does not offer any new ABS block.
What is the working mode?
The reconditioning of your ABS block and the shipping are fast.
Go to the Diag-Engine.fr store to select the make and model of your vehicle. Compare the part number with your ABS block. Then place your order to make your payment. As soon as possible, send to the address that appears on the order form your failed part.
The address to which you can send it is visible at the bottom of the site.
By email or by tel, you can contact us during working hours.
They trusted us
Some individuals and mechanics wanted to leave a message regarding the replacement of their ABS block.
- When I received the ABS block for my Honda Crosstour , I mounted the part myself. I was afraid to start it, but...miracle! No more ringing!"
- I was asked 1100 € to replace my ABS block. By going through Diag-Engine, it cost me 400 €. Super thank you !
- I'm not used to leave a review following a purchase on the internet, but there, I do it without hesitation for my Honda Crosstour ABS block : 5 stars thank you !
Use the chat window to submit your question to us during the store opening hours.
We repair the entire car or motorcycle abs block which our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs ECU - abs box - abs kit - hydraulic unit - abs esp block. Please note that we do not sell new or second hand products!