Mercedes SL R230 - Repair abs pump

What is the ABS block

The stability of the car thanks to the ABS block

It was the Bosch company that marketed a first version of ABS block in the late 1970s. The purpose of the ABS block in a vehicle is to prevent, when the driver presses hard on the brake pedal, the wheels from locking.

The ABS system to prevent wheel lockup

The ABS block is an accessory to the general ABS system. We distinguish for the brand Mercedes SL R230 ...

• The ABS block: what are the elements that make it up? This is what we will discover ...
• The magnetic targets: they generate signals read by the sensors, which transmit these signals to the ABS ECU.
• The wheel speed sensors: there are 2 types, passive sensors composed of a coil among others and active sensors.

The ABS block

The ABS block due to car manufacturer Mercedes SL R230 is made up of the following elements in particular:

The hydraulic unit

Here are some of the elements that make it up:

• Solenoid valves that regulate the braking pressure of each wheel.
• A hydraulic pump whose action moves the fluid accumulated in the accumulator to the master cylinder, which prevents the pedal from sinking.
• Pressure accumulators which are pressurized gas tanks used to provide a large flow rate for a short period of time.

The ECU

This receives information directly from the brake pedal.

The hydraulic motor

This transfers hydraulic energy into mechanical energy.

The Mercedes SL R230 ABS block reconditioning

What are the symptoms of an ABS block that is out of order?

The origins of this are diverse and the ones that show up most of the time are... The wheels lock up following sudden braking, a concern of an electrical nature.

What are the services of Diag-Engine.fr?

Diag-Engine is a French company that has largely proven itself in terms of its automotive know-how. Therefore, you will not be able to buy new ABS blocks from Diag-Engine.

How does it work?

As soon as we are in possession of your ABS block, just wait a few days to receive it as new.

The principle of operation is extremely easy: you choose the brand corresponding to your car, then the model and then the name of the manufacturer of the ABS block which corresponds to it. All you have to do is pay for this order and send your malfunctioning ABS block to Diag-Engine.

We are at your disposal by tel or email if you have any questions.

The address to which you can send it is indicated in the footer.

Some customer reviews

• I was asked for 1100 € to replace my ABS block. Thanks to Diag-Engine, it cost me only 380 €. Super thanks !
• When I received the ABS block for my Mercedes SL R230 , I mounted the part myself. I was afraid to turn the ignition key, but ... hallelujah! no more ABS light!"
• The installation of my ABS block was done by my garage! I hope that the repair will be durable even if it is guaranteed for life!

Go to a French company known for its know-how.