Mercedes SLC - Repair abs pump

Principle of the ABS block

Stability of the car with the ABS block

It was the German company Bosch that developed an early version of the ABS block in the late 1970s. The ABS block controls the slowing power of the wheels by adapting the level of pressure exerted. Because too much pressure on the brake pedal may cause the wheel to come to a complete stop.

The ABS system to keep control of the car

Before explaining the ABS block in detail, it is important to understand the ABS system in its entirety. We can notice for the brand Mercedes SLC ...

• The magnetic targets: they are, depending on the car models, directly integrated into the wheel bearings.
• The ABS block: the information below allows us to understand the determining role of this element.
• The wheel speed sensors: each of the sensors is placed in front of a notched wheel, which induces a sinusoidal signal, the quality of which depends on the speed of rotation of the wheels.

The ABS block

In an ABS block of the car manufacturer Mercedes SLC , we distinguish, among other things...

The motor driving a hydraulic pump

This is an organ that transforms a flow rate into a rotational speed and a pressure into an operating torque. The rotational speed of the motor is proportional to the flow rate that feeds it.

The ECU

This is the part that collects an information from the brake pedal.

The hydraulic power unit

It is made up of various components including:

• Pressure accumulators which are pressurized gas reservoirs that are used to provide a large flow rate for a fairly short time.
• The electronic splitter that shades the pressure on the rear wheels.
• A hydraulic pump that locks the brake pedal so that it does not sink.

How to replace Mercedes SLC ABS block?

How to tell if an ABS block is defective.

There are many reasons and the ones that appear most of the time are... The wheels lock up during emergency braking or an electrical problem.

What are the services of the company Diag-Engine?

Diag-Engine is a French company that has largely proven itself regarding its automotive know-how. Please note that Diag-Engine does not sell any new ABS blocks.

How does it work?

Go to the Diag-Engine.fr store to select the make and model of your car. Make sure the part number matches your ABS block. Click on the order button to make your payment. As soon as possible, send us your defective part to the address indicated on the transaction summary.

As soon as we receive your part, we will take care of its replacement and ship it to you 2 days later.

The address to which you should send it is written at the bottom of the site.

Don't worry, if you have any doubt about the choice of the ABS block, just ask us and we will communicate it to you.

Some customer reviews

Please read the many real customer reviews for their ABS block repair.

• I sent my ABS block to Diag-Engine and all the follow up and service was on point, from contact to repair and from the delay until delivery.
• Very responsive and fast service. Just 8 days between sending and return colissimo after repair.
• The Abs block is now reassembled and the braking has regained all its power!"

You have the option of making your payment with Paypal.

We repair the entire abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!