Mercedes Classe V - Repair abs pump

Focus on the ABS block

What is the purpose of the ABS block?

Since 2003, it is mandatory to have an ABS block installed on every car. The anti-lock braking system, or ABS, is an assistance in case of emergency braking, it allows you to keep control of the car by preventing the wheels from locking.

The ABS system to prevent wheel lockup

The ABS block is an accessory of the general ABS system. It can be noted for the Mercedes V-Class car ...

• Magnetic targets: they vary the output signal, which is in the form of a square signal of variable frequency.
• The ABS block: the information below helps to understand the importance of this part.
• Wheel speed sensors: there are 2 types, namely passive sensors consisting of a permanent magnet among other things, and active sensors.

The ABS block

In an ABS block due car manufacturer Mercedes V Class , we observe in particular...

The computer

It warns the driver of a technical problem by lighting a light on the dashboard.

The engine driving a hydraulic pump

It is an organ that transforms a flow rate into rotational speed and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The hydraulic unit

It is made up of various elements including...

• The electronic brake distributor, which is an additional function managed by the ECU.
• A hydraulic pump that allows the liquid stored in the accumulator to be ejected towards the master cylinder thus preventing the pedal from sinking.
• Pressure accumulators which are tanks of pressurized gas used to provide a large flow rate for a fairly short time.

Mercedes V-Class ABS block repair

How to tell if an ABS block is defective.

The causes are numerous and those that often show up are: The vehicle lacks stability on icy roads, an ABS sensor is out of order.

What are the services of the company Diag-Engine?

Diag-Engine is a French company that has largely proven itself regarding its automotive expertise. Please note: Diag-Engine does not sell any new ABS blocks.

How to proceed?

As soon as we receive your part, we will take care of its replacement and send it back to you 48 hours later.

The method of operation is very quick: you select the brand corresponding to your car, then the model and finally the name of the manufacturer of the ABS block that corresponds to it. Then you just have to pay for this order and send to Diag-Engine your broken ABS block.

Do not hesitate to contact us, a specialist will assist you.

The address to which you have to send it to us is indicated at the bottom of the site.

Some customer reviews

• I sent my ABS block to Diag-Engine and all the follow-up and service were top notch, from verbal exchange to repair and from delay to delivery.
• The Abs block is reassembled and the brakes work as before!"
• When I received the ABS block for my Mercedes V-Class , I mounted the part myself. I was afraid to turn the ignition key, but ... oh joy! no more warning triangle!"

Diag-Engine is at your disposal from Monday to Friday from 9am to 6pm.