Nissan Tiida - Repair abs pump

What is an ABS block?

Why is the ABS block useful?

It was the Bosch company that designed an early electronic ABS system in the late 1970s. The ABS block refers to the anti-lock wheel system to prevent, during too sudden braking, that the wheels do not lock.

The ABS system to prevent wheel lock

The ABS block is a part of the general ABS system. We distinguish for the car manufacturer Nissan Tiida ...

• The ABS block: more details below.
• Magnetic targets: they generate signals read by the sensors, which transmit these signals to the ABS computer.
• Wheel speed sensors: each sensor is placed in front of a target, namely a notched wheel also called phonic wheel.

The ABS block

Many elements of the ABS block of the Nissan Tiida car to be apprehended including:

The hydraulic unit

It is composed of various elements including:

• Solenoid valves of which each wheel has a solenoid intake valve and a solenoid exhaust valve.
• A hydraulic pump whose action allows the liquid accumulated in the accumulator to be pumped back to the master cylinder, which prevents the pedal from sinking.
• Pressure accumulators which are nothing but pressurized gas tanks used to provide a large flow rate for a short period of time.

The hydraulic motor

It uses the oil flow that is pushed into the hydraulic circuit by a hydraulic pump and transforms it through a rotary motion to drive another device such as the gearbox or another pump, etc.

The ECU

Every time a wheel locks, it controls the solenoid valves and hydraulic pump.

Nissan Tiida ABS block repair

How to recognize an ABS block that is out of order

Most of the time, it is one or the other reason... The car is unstable in wet driving conditions or the brake pressure regulation is not done properly.

What are the services of the company Diag-Engine.fr?

Diag-Engine is a competent company in the repair of the ABS block all brands. Please note: Diag-Engine does not sell any new ABS blocks.

What is the procedure?

The principle of operation is extremely fast. You select the make of your car, then the model and then the brand of ABS block that corresponds to it. Thus you only have to go to the purchase and send to Diag-Engine your failed ABS block.

One week is enough for you to own your ABS block again in working condition.

You will find the address of the Diag-Engine workshop in the footer.

Do not hesitate to contact us, a technician will assist you.

Some customer reviews

• The Abs block is reassembled and the brakes work as before!
• The garage owner asked me for 1000 € to replace my ABS block. By going through Diag-Engine, it cost me only 350 €. Super thanks!"
• Thank you for your fast and efficient service. The breakdown has disappeared. The technical control could be favorable.

Put your order by credit card safely.