Peugeot Bipper - Repair abs pump

How does an ABS block work?

The ABS block and road safety

The ABS has been mandatory in Europe since 2003. It works through sensors, a computer and a hydraulic control system. In case of emergency braking, the ABS block allows the driver to keep control of his car. Because locking the wheels in such circumstances would cause a slip on the road.

A valuable aid: the ABS system

The ABS block is part of the overall ABS system. It is discovered for the Peugeot Bipper car ...

• Magnetic targets: they produce signals read by the sensors, which send these signals to the ABS computer.
• Wheel speed sensors: there are 2 types, active sensors that are connected to the ABS computer by a cable and inductive sensors.
• The ABS block: how is it composed? Let's see it in more detail below ...

The ABS block

Different elements of the Peugeot Bipper ABS block to discover including:

The hydraulic motor

It uses the oil flow that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as for example the gearbox or the fan, etc.

The hydraulic unit

• Solenoid valves, of which each impeller has an inlet solenoid valve and an exhaust solenoid valve.
• A hydraulic pump whose discharge is the cause of the pulsations felt at the pedal.
• The electronic distributor that modulates the pressure on the rear wheels.

The ECU

Each time a wheel locks, it regulates the solenoid valves and hydraulic pump.

The Peugeot Bipper ABS block repair

How to tell if an ABS block is out of order.

This is most often manifested as a result of... The car is unstable on wet roads, the regulation of the brake pressure is not done normally.

What does the company Diag-Engine.fr offer?

Diag-Engine is a company located in the department of Eure for many years and expert in the reconditioning of the ABS block of the brand Peugeot Bipper and others. It is important to understand that Diag-Engine does not sell new ABS blocks.

What is the procedure?

As soon as we receive your part, we will take care of its replacement and send it back to you 48 hours later.

The principle of operation is easy: you select the brand corresponding to your car, then the model and finally the name of the manufacturer of the ABS block whose inscription must appear on it. All you have to do is to proceed to the purchase and send to Diag-Engine your failed ABS block.

You can't find the reference? Write to us and we will assist you.

You will find the address of Diag-Engine workshop in the footer.

Customer feedback

• Thank you for your fast and efficient service. The fault has disappeared. The technical inspection could be favorable.
• Very responsive and fast service. Just 8 days between the shipment and return colissimo after repair.
• The installation of my ABS block was done by my garage! I hope that the repair will be durable even if it is guaranteed for life!"

If you need help, our technicians are at your disposal.