Toyota Allex - Repair abs pump

What is an ABS block

ABS block and automotive control

For the record, anti-lock braking systems were first developed for airplanes in the 1920s: they were needed to prevent skidding on landing. The ABS block controls the braking power of the wheels by adapting the level of pressure applied. Because too much pressure on the brake pedal can cause the wheels to come to a complete stop.

Focus on the ABS system

The ABS block is part of the general ABS system. We therefore discover for the Toyota Allex model ...

• The ABS block: the following information allows us to understand the determining role of this element.
• The wheel speed sensors: we note 2 types, namely the active sensors that are connected to the ABS computer by a cable and the inductive sensors.
• The magnetic targets: they are in the form of a series of north and south poles. The alternation of the poles changes the output signal.

The ABS block

In an ABS block of the Toyota Allex vehicle , we distinguish in particular:

The hydraulic unit

It is composed of several elements including...

• Solenoid valves that eliminate the need for a brake compensator.
• A hydraulic pump that ejects the accumulated fluid in the accumulator to the master cylinder.
• Pressure accumulators, which are pressurized gas reservoirs that can hold a variable volume of a pressurized liquid.

The ECU

It alerts the driver to a technical problem with a light on the dashboard.

The hydraulic motor

It transfers hydraulic energy into mechanical energy.

How to replace Toyota Allex ABS block

Main manifestations of failed ABS block

The causes are varied and the ones that manifest themselves most of the time are: The ABS light is on on your dashboard or a problem of electrical nature.

What does Diag-Engine.fr offer?

Diag-Engine is a French company that has largely proven itself regarding its automotive know-how. It is important to understand that Diag-Engine does not sell any new ABS blocks.

How does it work?

48 hours are enough for your ABS block to be repaired and then sent to the place of your choice.

You have to locate the reference of your malfunctioning ABS block to request its repair. Then, you just pay for the part in your shopping cart after selecting the make and model of the vehicle you own. Finally, send your malfunctioning ABS block to the indicated address immediately after.

The address where you need to send it to us is visible in the footer.

By email or tel, you can contact us during the working hours.

They are happy with Diag-Engine.co.uk

• Very responsive and fast service. Just 8 days between the sending and the return in colissimo after repair.
• I sent my ABS block to Diag-Engine and all the follow-up and service were at the rendezvous, from the contact to the repair and from the delay until the delivery.
• The garage owner asked me 1300 € to replace my ABS block By going through Diag-Engine, I got it for only 380 €. Great thanks !

Important ! Payment in installments and free of charge is possible.