• Illustrative photo
Toyota Celica - Absorption block repair
  • Toyota Celica - Absorption block repair

Toyota Celica - Repair abs pump

Repair your Toyota Celica ABS Pump within 24/48 hours. Our service is Money Back Guaranteed with a lifetime warranty. We repair the 99.9% of ABS Module. Contact us for more information!
€396.00
Tax included
Quantity

Toyota Celica ABS pump Repair Service


Procedure:

red-cross-1-en.jpg We offer a repair service for your ESP ABS pump

red-cross-1-en.jpg Place an order on the site by selecting your model, print your invoice and then send us your original ABS pump well protected by enclosing the invoice in the parcel, shipping is at your expense, the return is free.

red-cross-1-en.jpg We process ABS pump repairs in 48 hours upon receipt.

red-cross-1-en.jpg All repairs are guaranteed for life.

red-cross-1-en.jpg Repairable defects in the list below

Fondw2-en.jpg


Defects:

red-cross-1-en.jpg - No brake pressure on one wheel

red-cross-1-en.jpg - Brakes remain pressurized

red-cross-1-en.jpg - Brake fluid leak

red-cross-1-en.jpg - Soft brake pedal

red-cross-1-en.jpg - C146C C146D Pump motor failure

red-cross-1-en.jpg - C1246 Brake pressure sensor fault

red-cross-1-en.jpg - C0279 C1361 C0279 Internal Solenoid Valve Relay Fault

red-cross-1-en.jpg - C1073 C2116 Pump Motor Circuit

red-cross-1-en.jpg - C121D C121E Brake pressure sensor fault

red-cross-1-en.jpg - C1251 Pump motor relay

red-cross-1-en.jpg - C1223 Pump Motor Relay

red-cross-1-en.jpg - 55 Pump Motor Relay

- 56 Pump Motor Relay

contactbas-en.jpg

330 Items

Data sheet

Brand
Toyota
Model
Celica

Specific References

What is an ABS block


Anti-lock braking system and car control


For the record, anti-lock braking systems have been around since 1920 in the airline industry to prevent airplanes from skidding on landing. The anti-lock braking system, or ABS, is an assistance in case of emergency braking.It helps to maintain control of the car by preventing the wheels from locking.


The ABS system to prevent wheel lockup


The ABS block is a part of the overall ABS system. We can observe for the Toyota Celica vehicle manufacturer ...


  • The ABS block: how is it composed? This is what we will find out...
  • The magnetic targets: they modify the output signal that takes the appearance of a square signal of variable frequency.
  • The wheel speed sensors: there are 2 types, namely active sensors that are powered by the ABS ECU via a cable and inductive sensors.

The ABS block


Let's look at the non-exhaustive structure of the ABS block due to car manufacturer Toyota Celica ...


The hydraulic motor

It transfers hydraulic energy into mechanical energy.


The ECU

It warns the driver of a malfunction via a specific indicator light on the instrument panel.


The hydraulic unit

Many components make it up including...


  • Electronic brakeforce distribution, which is an additional function managed by the ECU.
  • Pressure accumulators, which are none other than pressurized gas reservoirs that can hold a variable volume of a pressurized liquid.
  • Solenoid valves that eliminate the need for a brake compensator.

How to change the Toyota Celica ABS block?


How to tell if an ABS block is out of order?


The reasons are many and those that often show up are: The wheels lock up during emergency braking or the brake pressure regulation is not working properly.


What are the services of Diag-Engine.fr?


Diag-Engine is a company that specializes in the replacement of the ABS block all types of models. It is important to understand that Diag-Engine does not sell any new ABS blocks.


What is the operating mode?


The operating principle is extremely fast. You choose the brand of your car, then the model and finally the brand of ABS block that corresponds to it. All you have to do is order and send us your malfunctioning ABS block.


The reconditioning of your ABS block and shipping takes only a few days.


We are at your disposal by tel or email at the slightest doubt.


The address to which you should send it is visible in the footer.


They trusted us


Some individuals and professionals were keen to give their opinion regarding the reconditioning of their ABS block.
  • Thank you for your fast and efficient service. The fault is gone. The CT has validated.
  • The mechanic gave me a quote of 1300 € to replace my ABS block. By going through Diag-Engine, it cost me only 350 €. Great thanks!"
  • The Abs block is now back together and the braking has regained all its power!"

Call on a French company known for its expertise.


We repair the entire abs block car or motorcycle that our customers often call by the following terms: pressure sensor - abs pump - hydraulic block - abs calculator - abs box - abs kit - hydraulic group - abs block esp. Please note that we do not sell new or second hand products!