Fiat 500X - Repair abs pump

What is the ABS block

Automotive stability with the ABS block

For the record, the ABS system was first developed for airplanes in the 1920s: it was necessary to prevent skidding on landing. The ABS block regulates the pressure of the hydraulic fluid that travels from the pedal to the brake calipers. Thanks to a sensor, installed on the wheels, the ABS block can thus release the pressure on the wheels that would be blocked, to give back the control of the trajectory of the vehicle to the driver.

Focus on the ABS system

Before explaining in detail the ABS block, it is important to understand the ABS system in its entirety. We distinguish for the brand Fiat 500X ...

• The ABS block: let's see in more detail the elements that make it up below...
• The magnetic targets: they generate signals read by the sensors, which transmit these signals to the ABS computer.
• The wheel speed sensors: they measure the speed of rotation of the wheels.

The ABS block

In an ABS block of the Fiat 500X automobile, we distinguish in particular...

The hydraulic motor

It is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The rotational speed of the motor is proportional to the flow rate that feeds it.

The hydraulic power unit

It is made up of several components including:

• Pressure accumulators which are none other than tanks of pressurized gas used to provide a large flow rate for a fairly short period of time.
• Solenoid valves of which each impeller has an inlet solenoid valve and an exhaust solenoid valve.
• A hydraulic pump whose action moves the liquid stored in the accumulator to the master cylinder, which prevents the pedal from sinking.

The ECU

It warns the driver of a malfunction by lighting a specific light on the dashboard.

The Fiat 500X ABS block repair

How to recognize a malfunctioning ABS block

The causes are various and those that often appear are... The ABS light is on on your dashboard, an ABS sensor is out of order.

What does Diag-Engine offer?

Diag-Engine is a company located in the Eure region and specializes in the replacement of the ABS block of the Fiat 500X brand and others. It is important to understand that Diag-Engine does not sell any new ABS block.

How it works?

The repair of your ABS block and shipping takes only a few days.

The principle of operation is very easy. You choose the make corresponding to your car, then the model and finally the name of the ABS block manufacturer that corresponds to it. All you have to do is order and ship us your malfunctioning ABS block.

You will find our address in the footer of the site.

Don't worry, if you have any doubts regarding the choice of the ABS block, just contact us so that we can tell you.

They are happy with Diag-Engine

• I sent my ABS block to Diag-Engine and all the follow up and service were on point, from the verbal exchange to the repair and from the delay until the delivery.
• The dealer gave me an estimate of 1400 € to replace my ABS block. With Diag-Engine, I got it for only 400 €. Super thank you !
• I am not used to leave a review following a purchase on the internet, but there, I do it without hesitation for my ABS block Fiat 500X: 5 stars thank you !

If you need help, our technicians are at your service.