Renault Clio 3 - Repair abs pump

What is the ABS block?

What is the ABS block used for?

It was the German company Bosch that designed the first version of ABS block in the late 1970s. The ABS block refers to the principle of anti-lock wheels to eliminate, during emergency braking, that the wheels do not lock.

A valuable assistant: the ABS system

Before explaining the ABS block, it is necessary to understand the ABS system completely. We distinguish for the Renault Clio 3 vehicle ...

• The wheel speed sensors: we see 2 types, the active sensors that are powered by the ABS ECU through a cable and the inductive sensors.
• The ABS block: what are the elements that compose it? Let's see it in more detail below...
• The magnetic targets: they generate signals read by the sensors, which transmit these signals to the ABS ECU.

The ABS block

The ABS block of the car manufacturer Renault Clio 3 is made up of the following elements in particular:

The ECU

Each time a wheel locks, it guides the solenoid valves and the hydraulic pump.

The hydraulic motor

It uses the oil flow that is pushed into the hydraulic circuit by a hydraulic pump and transforms it by a rotary motion to drive another device such as gearbox or fan, etc.

The hydraulic unit

Here are some of the elements that constitute it...

• Solenoid valves that control the braking pressure of each wheel.
• The electronic splitter that modulates the pressure on the rear wheels.
• A hydraulic pump whose action allows the liquid accumulated in the accumulator to be pumped back to the master cylinder.

Renault Clio 3 ABS block repair

What are the symptoms of an ABS block Out of order?

Most of the time it is one of two reasons: The ABS light is on on your dashboard or the brake pressure regulation is not working normally.

What does Diag-Engine offer?

Diag-Engine is a company that specializes in the replacement of the ABS block all types of models. Therefore, you will not find new ABS blocks at Diag-Engine.

How does it work?

48 hours is enough for your ABS block to be functional again and then shipped to your home.

The method of operation is relatively simple: you choose the brand corresponding to your vehicle, then the model and then the brand of ABS block whose inscription must appear on it. All you have to do is pay for this order and send us your defective ABS block.

Don't worry, if you are not sure about your choice of ABS block, just ask us so that we can tell you.

The address where you can send it to us is listed at the bottom of the page.

They are happy with Diag-Engine company

• Thank you for your fast and efficient service. The breakdown has disappeared. The technical control could be favorable.
• I was asked 1200 € to replace my ABS block. Thanks to Diag-Engine, it cost me only 400 €. Phew thank you !
• I'm not used to leave a comment during a purchase, but there, I'm very eager to do so I'm happy for my ABS block Renault Clio 3 : 5 stars thank you !

You have the possibility to make your payment with Paypal.