Renault Wind - Repair abs pump

Understanding the principle of the ABS block

Vehicle stability with the ABS block

It was the Bosch company that developed the first electronic ABS system in the late 1970s. The principle of the ABS system is rather well understood by the general public because it simply prevents the wheels from locking up when the driver presses the brake pedal a little roughly.

The ABS system quickly

Before talking about the ABS block, it is important to understand the ABS system in its entirety. We discover for the Renault Wind vehicle ...

• The magnetic targets: they are, depending on the car models, integrated into the wheel bearings.
• The ABS block: more details below.
• The wheel speed sensors: each of the sensors is placed in front of a rotating gear that generates a magnetic field variation and induces a sinusoidal signal.

The ABS block

The ABS block due to the car manufacturer Renault Wind is made up of the following elements in particular:

The motor driving a hydraulic pump

This is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The hydraulic unit

It is made up of several elements including:

• The electronic brake splitter, which is an additional function managed by the ECU.
• Pressure accumulators, which are pressurized gas reservoirs used to provide a large flow rate for a fairly short time.
• Solenoid valves, of which each wheel is equipped with an intake and exhaust solenoid valve.

The ECU

This is the part that collects an information that emanates from the brake pedal.

How to change Renault Wind ABS block

Main manifestations of ABS block failure

This is quite often one or the other reason: The car is unstable in wet driving conditions or the regulation of brake pressure is not done properly.

What are the services of Diag-Engine?

Diag-Engine is a competent company in the reconditioning of the ABS block all types of models. It is important to understand that Diag-Engine does not sell any new ABS blocks.

How to proceed?

You need to note the reference of your defective ABS block in order to order its repair. Then all you have to do is pay for the part in your shopping cart after choosing the make and model of vehicle you own. So, send us your malfunctioning ABS block as soon as possible.

7 days is enough for you to receive your repaired ABS block.

By email or tel, you can contact us during business hours.

The address where you can send it to us is written at the bottom of the page.

Some customer reviews

• The Abs block is reassembled and the brakes work like they used to!"
• When I received the ABS block for my Renault Wind , I mounted the part myself. I was afraid to turn the ignition key, but ... hallelujah! no more warning triangle!
• The installation of my ABS block was done by my garage! I hope the repair will be durable even if it is guaranteed for life!"

Use the chat window to tell us about your problem during store hours.