Toyota Mark II - Repair abs pump

Principle of ABS block

ABS block and car control

For the record, the ABS system was first developed for airplanes in the 1920s to prevent skidding on landing. The anti-lock braking system is an emergency braking assistance, it helps to maintain control of the vehicle by preventing the wheels from locking.

The ABS system quickly

The ABS block is a part of the overall ABS system. Therefore, we discover for the car manufacturer Toyota Mark II ...

• The magnetic targets: they are, depending on the car models, directly integrated into the wheel bearings.
• The ABS block: the following technical details help to understand the decisive role of this accessory.
• The wheel speed sensors: there are 2 types, namely active sensors operating through electronics, which are supplied via a voltage defined by the ABS computer and inductive sensors.

The ABS block

Many elements of the ABS block of the Toyota Mark II car to discover including:

The hydraulic motor

This is an organ that transforms a flow rate into rotational velocity and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The computer

It receives the information that emanates from the brake pedal.

The hydraulic unit

• A hydraulic pump whose action allows the liquid stored in the accumulator to be moved to the master cylinder thus preventing the pedal from depressing.
• Electronic brakeforce distribution, which has an additional role managed by the ECU.
• Pressure accumulators which are none other than pressurized gas reservoirs used to provide a large flow for a short period of time.

How to change the Toyota Mark II ABS block.

How to tell if an ABS block has failed.

It is quite often one or the other reason... The car lacks stability in wet driving conditions or the regulation of the brake pressure does not work normally.

What does Diag-Engine.fr offer?

Diag-Engine is a French company that has largely proven itself in terms of its automotive know-how. Let us emphasize that Diag-Engine does not offer any new ABS blocks.

How to do it?

The method of operation is relatively easy. You select the make of your automobile, then the model and then the name of the manufacturer of the ABS block that matches it. All that's left is to order and ship your broken ABS block to us.

The refurbishment of your ABS block and shipping takes only a few days.

Don't hesitate to contact us, a technician will assist you.

The address to which you can send it is listed at the bottom of the page.

They are happy with Diag-Engine.fr

• Thank you for your fast and efficient service.The ABS warning light on disappeared. The CT has validated.
• The garagist gave me an estimate of 1400 € to replace my ABS block. By going through Diag-Engine, it cost me only 400 €. Great thanks!"
• The Abs block is back together and the brakes work as before!"

You have the possibility to make your payment with Paypal.