Focus on the ABS block

What is the purpose of the ABS block?

It's not always known, but the ABS system was first developed for airplanes in the 1920s: it was necessary to prevent skidding on landing. The ABS block limits the amount of deceleration of each wheel by adapting the level of pressure applied. Because too much pressure can bring the wheels to a complete stop.

The ABS system quickly

The ABS block is an accessory to the general ABS system. We can observe in Renault Kadjar ...

• The magnetic targets: they are, depending on the vehicle models, directly integrated into the wheel bearings.
• The ABS block: how is it composed? This is what we will discover ...
• The wheel speed sensors: there are 2 types, the active sensors operating through electronics, which are powered by a voltage determined by the ABS computer and inductive sensors.

The ABS block

Let's look at the partial composition of the ABS block of the Renault Kadjar model:

The hydraulic unit

Here are some of the elements that make it up:

• The electronic distributor that modulates the pressure on the rear wheels.
• Solenoid valves with the presence of ABS regulation on the rear wheels.
• A hydraulic pump whose delivery causes the swirls felt under the foot.

The motor driving a hydraulic pump

This is a member that transforms a flow rate into rotational speed and a pressure into operating torque. The speed of rotation of the motor is proportional to the flow rate that feeds it.

The ECU

It collects information that emanates from each of the wheel sensors.

The Renault Kadjar ABS block reconditioning

How to tell if an ABS block is failing.

The causes are varied and those that often appear are... The wheels lock up during hard braking or an ABS sensor is defective.

What are the services of Diag-Engine?

Diag-Engine is a competent company in the replacement of the ABS block all brands. It is important to understand that Diag-Engine does not sell any new ABS blocks.

Concretely...

The operating principle is relatively simple. You choose the brand corresponding to your car, then the model and finally the brand of ABS block that corresponds to it. All you have to do is order and send your problematic ABS block to Diag-Engine.

One week is needed for you to get your repaired ABS block back.

You will find the address of the Diag-Engine workshop in the footer of the website.

Don't hesitate to contact us, a specialist will give you his help.

Some customer reviews

• The Abs block is now reassembled and the brakes work as before!
• When I received the ABS block for my Renault Kadjar , I mounted the part myself. I was afraid to start, but ... hallelujah! No more ringing!"
• I was asked for 1000 € to replace my ABS block. With Diag-Engine, I got it for 400 €. Great thanks!"

Pay in 4 times without charge and receive an immediate response.